Journal articles

2021

  • Sanati, M., Mostaghimi, H., Sandwell, A., Lee, J., & Park, S. S. (2021). Identification of Lap Joint Dynamics Using Interfacial Nanocomposite Force Sensor. IEEE Access.
  • Chuo YS; Lee JW; Mun CH; Noh IW; Rezvani S; Kim DC; Lee J; Lee SW; Park SS*. (2021). Artificial Intelligence Enabled Smart Machining and Machine Tools. Journal of Mechanical Science and Technology – Accepted
  • Lee JW; Lee J; Lee SW*. (2021). Development of an Explainable Fault Diagnosis Framework Based on Sensor Data Imagification: A Case Study of the Robotic Spot-Welding Process, IEEE Transactions on Industrial Informatics - Accepted

2020

  • Liu, L., Wong, D., Lee, J., Park, S. S. "Flexibility Enhancements of Hybrid Copper Inks with Cellulose Nanocrystals," International Journal of Precision Engineering and Manufacturing-Green Technology, 2020, pp.1-12.
  • Rezvani, S., Kim, C.J., Park, S.S., Lee, J."Simultaneous Clamping and Cutting Force Measurements with Built-In Sensors," Sensors,2020,20(13),3736 
  • Lee, J.*, Kim, C.J., Lee, C., Oh, C.,2020, “Optimal Design of Multiple Tuned Mass Dampers to Reduce Vibrations of Ram-Type Structure with Varying Dynamic via a Control Theoretic Framework,” Journal of Manufacturing science and engineering, Feb 2020, 142(2): 021009
  • Sandwell, A., Lee, J. *, Park, C.I., Park, S. S., 2020, “Novel Multi-degrees of Freedom Optical Table Dynamometer for Force Measurements,” Sensors and Actuators A: Physical.111688 

2019

  • Park, C.I., Wei, Y., Hassani, M., Jin, X., Lee, J., Park, S.S. *, 2019, “Low Power Direct Laser-Assisted Machining of Carbofiber-reinforced polymer,” Manufacturing letters, 22:19-24

2017

  • Kim, S. *, Oh, J.S., Lee, J., et al.,2017, “3D Coordinate Measurement System Based on Multiple Absolute Distances for Mobile Machining Platform,” Journal of the Korean Society of Manufacturing Technology Engineering, 26(6), pp.632-638
  • Lee, J., Amir, H.G., Okwudire, C.E. *, Jeffrey, S., 2017, “A Linear Feedback Control Framework for Optimally Locating Passive Vibration Isolators with Known Stiffness and Damping Parameters,” Journal of Vibration and Acoustics, pp. 139~149

2014

  • Lee, J., Okwudire, C.E. *, 2014, “Reduction of Vibrations of Passively-Isolated Ultra-Precision Manufacturing Machines using Mode Coupling,” Precision Engineering, 43, pp.164-177

2013

  • Okwudire, C.E. *, Lee, J., 2013, “Minimization of the Residual Vibrations of Ultra-Precision Manufacturing Machines via Optimal Placement of Vibration Isolators,” Precision Engineering, 37, pp.425-432

Conference Papers

  • Khishtan, A., Wang, Z., Kim, S.H., Park, S.S., Lee. J.*, 2021, Nonlinear disturbance observer-based compliance error compensation in robotic milling, 50th SME North American Manufacturing Research Conference (NAMRC50), June 27 - July 1, 2022, Purdue University, West Lafayette, IN - Submitted
  • Rezvania, S., Nikolov, N., Kim, C.J., Park, S. S., Lee, J.*, 2020, Development of a Vise with built-in Piezoelectric and Strain Gauge Sensors for Clamping and Cutting Force Measurements, 48th SME North American Manufacturing Research Conference (NAMRC 48), June 22-26, 2020, Cincinnati, OH, USA
  • Liu L, Wong D*, Lee J, Park S.S*, 2019, "Flexibility Enhancements of Hybrid Copper Inks with Cellulose Nanocrystals." 3rd World Congress on Micro and Nano Manufacturing, Raleigh, United States
  • Lee, J. *, Kim, C.J., Lee, C. and Lee, G., 2018, “Optimally Locating Multiple Tuned-Mass-Dampers for Vibration Reduction in Machine Tool Structure,” ASPE Annual Meeting, November 4-9, 2018, Las Vegas, Nevada, USA
  • Lee, J. * and Lee, C.H., 2017, “Effect of Flexible Multi-Axis Structures on Feed Motion Planning,” Proceeding of the 7th International Conference on Manufacturing, Machine Design and Tribology, April 19-22, 2017, South Korea
  • Amir, H.G., Lee, J. and Okwudire, C.E. *, 2015, “A Control Theoretic Framework for Optimally Locating Passive Vibration Isolators to Minimize Residual Vibration,” Proceeding of the ASME Dynamic Systems and Control Conference, October 28-30, 2015, Columbus, OH, USA
  • Lee, J., Okwudire, C.E. *, 2014, “Effects of Non-Proportional Damping on the Residual Vibrations of Mode-Coupled Ultra-Precision Manufacturing Machines,” Proceeding of the ASME Dynamic Systems and Control Conference, October 22-24, 2014, San Antonio, TX, USA
  • Lee, J., Okwudire, C.E. *, 2013, “Optimal Damping for the Reduction of Residual Vibrations in Ultra-Precision Manufacturing Machines,” ASPE Annual Meeting, October 20-25, 2013
  • Okwudire, C.E. *, Lee, J., 2013, “Optimal Motor Location for the Reduction of Residual Vibrations in Mode-Coupled Ultra-Precision Manufacturing Machines,” ASME International Manufacturing Science and Engineering Conference (MSEC), June 10-14, 2013, Madison, WI, USA

Presentations

  • Research seminar at Korea Advanced Institute of Science & Technology, South Korea, 2020
  • Research seminar at Yonsei University, South Korea, 2020
  • Open seminar at Manchester University, United Kingdom, 2019
  • Research Seminar in Canada-Korea Conference on Science and Technology(CKC), Canada, 2019
  • Graduate Seminar at KyungHee University, South Korea, 2019
  • Industry Seminar in HWACHEON Machinery co.,ltd , South Korea, 2018
  • Graduate Seminar in SungKyunKwan University, South Korea, 2018
  • Graduate Seminar at Inha University, South Korea, 2017
  • Future Science & Engineering Researcher Session in The Korean Society for Precision Engineering, South Korea, 2017
  • Undergraduate Seminar in Yonsei University, South Korea, 2017
  • The 7th International Conference on Manufacturing, Machine Design and Tribology, South Korea, 2017
  • Future Science & Engineering Researcher Session in The Korean Society for Noise and Vibration Engineering, South Korea, 2016
  • Future Science & Engineering Researcher Session in The Korean Society of Mechanical Engineers, South Korea, 2016
  • Research Seminar in Korea Institute of Machinery& Materials, South Korea, 2016
  • Graduate Seminar in Yonsei University, South Korea, 2016
  • Engineering Graduate Symposium in University of Michigan, Ann Arbor, 2015
  • ASME 2015 Dynamic Systems and Control Conference (DSCC), Columbus,OH,2015
  • ASME 2014 Dynamic Systems and Control Conference (DSCC), San Antonio,TX,2014
  • ASME 2014 International Manufacturing Science and Engineering Conference (MSEC), Detroit,2014.
  • Hyundai Global Top Talent Forum, San Francisco, USA, 2013.
  • Engineering Graduate Symposium in University of Michigan, Ann Arbor, 2013.
  • ASME 2012 International Manufacturing Science and Engineering Conference (MSEC), Detroit,2012.