1. AMAT 217 Calculus for Engineers and Scientists
2. AMAT 219 Multivariable Calculus for Engineers
3. CHEM 209 General Chemistry for Engineers
4. ENGG 201 Behaviour of Liquids, Gases and Solids
5. ENGG 205 Engineering Mechanics I

6. ENGG 233 Computing for Engineers I
7. ENGG 251 Design and Communications I
8. ENGG 253 Design and Communications II

9. MATH 221 Linear Algebra for Scientists and Engineers
10. PHYS 259 Electricity and Magnetism
11. Complementary Studies Course

Refer to "Faculty Regulations - Admissions" above.

See also "First Year Curriculum Requirements Common to All Programs" above.

Chemical Engineering, regular program and Minor in Petroleum Engineering

1. AMAT 307 Differential Equations for Engineers
2. CHEM 357 Industrial Organic Chemistry for Engineers
3. ENCH 315 Chemical Engineering Process Calculation
4. ENCH 331 Process Fluid Dynamics

5. ENGG 311 Engineering Thermodynamics
6. ENGG 317 Mechanics of Solids
7. ENGG 319 Probability and Statistics for Engineers
8. ENGG 325 Electric Circuits and Systems
9. ENGG 335 Computing for Engineers II
10. ENGG 349 Engineering Mechanics II
11. Science Option

Notes:

1. Students are admitted to the Petroleum Engineering minor at the time of registration in the fourth-year programs. Prior to that time, students who wish to be considered for the minor must have completed GLGY 377 and ENPE 523. Students who take these two courses prior to the end of 3rd year and who are admitted to the regular program instead of the minor will receive credit for these courses as 4th year technical electives.
2. The courses that are acceptable for the Science option include PHYS 369 and GLGY 377; other courses from the Faculty of Science may be substituted with approval of the student's department and the relevant department in the Faculty of Science.

Chemical Engineering, regular program and minor in Petroleum Engineering

1. CHEM 409 Applied Chemistry and Chemical Pathways for Engineers
2. ENCH 401 Analyses in Chemical, Oil & Gas Engineering
3. ENCH 403 Heat and Mass Transfer
4. ENCH 405 Separation Processes I
5. ENCH 421 Chemical Engineering Kinetics
6. ENCH 423 Chemical Engineering Process Development
7. ENCH 427 Chemical Engineering Thermodynamics
8. ENGG 407 Numerical Methods in Engineering
9. Technical Elective (one half-course equivalent)
10., 11. Two Complementary Studies Courses (two half-course equivalents) for students in the regular program, or one complementary studies course and one technical elective (two half-course equivalents) for students intending the Petroleum Engineering minor.

Chemical Engineering, regular program

1. CHEM 579 Surface and Colloid Chemistry for Engineers
2. ENCH 501 Transport Processes
3. ENCH 505 Separation Processes II
4. ENCH 511 Chemical Process Design I
5. ENCH 529 Process Dynamics and Control
6. ENCH 531 Chemical Process Design II
7. ENCH 551 Chemical Engineering Laboratory
8. ENGG 513 The Role and Responsibilities of the Professional Engineer in Society
9., 10. Technical Electives (two half-course equivalents)
11., 12. Complementary Studies Courses (two half-course equivalents)

Chemical Engineering with a Minor in Petroleum Engineering

1. CHEM 579 Surface and Colloid Chemistry for Engineers

2. ENCH 501 Transport Processes

3. ENCH 529 Process Dynamics and Control
4. ENGG 513 The Role and Responsibilities of the Professional Engineer in Society
5. ENCH 505 Separation Processes II
6. ENPE 511 Design for Oil & Gas Engineering I
7. ENPE 531 Design for Oil & Gas Engineering II
8 ENPE 551 Petroleum Engineering Laboratory
9.Technical Elective (one half-course equivalent)
10. - 12. Complementary Studies Courses (three half-course equivalents)

Regular program.
Select three half-course equivalents.

Petroleum Engineering Minor, select one half-course equivalents.

ENCH 503 Upgrading and Refining Processes

ENCH 519 Special Topics

ENCH 535 Principles of Biochemical Engineering
ENCH 537 Computational Thermodynamics
ENCH 539 Polymer Engineering
ENCH 541 Introduction to Cell and Tissue Engineering

ENPE 507 Well Logging and Formation Evaluation
ENPE 509 Well Testing
ENPE 513 Flow in Porous Media

ENPE 515 Drilling and Well Completions
ENPE 523 Introduction to Reservoir Engineering

ENPE 525 Waterflooding
ENPE 533 Petroleum Production Engineering
ENPE 543 Geological Characterization of Oil & Gas Reservoirs

ENPE 555 Oil & Gas Field Safety and Environment
ENPE 561 Fuel Science and Technology

ENPE 563 Materials Aspects of Oil & Gas Production
GLGY 377 Petroleum Engineering Geology

Note: Students in the Petroleum Engineering Minor are required to take ENPE 523 and GLGY 377. Hence these two courses cannot be selected as technical electives.

Refer to "Faculty Regulations - Admissions" above.

See also "First Year Curriculum Requirements Common to All Programs" above.

Civil Engineering, regular program and Minors in Environmental Engineering, Structural Engineering, and Transportation Engineering

1. AMAT 307 Differential Equations
2. ENCI 337 Computer Tools for Engineering Design
3. ENGG 311 Engineering Thermodynamics
4. ENGG 319 Probability and Statistics for Engineers
5. ENGG 317 Mechanics of Solids
6. ENGG 325 Electric Circuits and Systems
7. ENGG 349 Engineering Mechanics II
8. ENGG 407 Numerical Methods in Engineering
9. ENME 341 Fundamentals of Fluid Mechanics
10. PHYS 369 Acoustics, Optics and Radiation for Engineers
11. Complementary Studies Course (one half-course equivalent)

Block course - ENCI 001 Computer Aided Drafting in Civil Engineering (32 hours)

Civil Engineering, regular program and Minors in Environmental Engineering, Structural Engineering, and Transportation Engineering

1. ENCI 413 Introduction to Civil Engineering Materials
2. ENCI 423 Soil Mechanics
3. ENCI 451 Basic Structural Design
4. ENCI 461 Mechanics of Materials
5. ENCI 465 Engineering and Construction Management
6. ENCI 471 Introduction to Project Management
7. ENCI 473 Transportation Planning
8. ENCI 481 Environmental Engineering
9. ENGO 343 Fundamentals of Surveying
10. GLGY 471 Geology, Engineering and the Environment
11., 12. Complementary Studies Courses (two half-course equivalents)

Civil Engineering, regular program

1., 2. ENCI 570 Group Design Project (two half-course equivalents)
3. ENGG 513 The Role and Responsibilities of the Professional Engineer in Society
4. - 11. Technical Electives (eight half-course equivalents)
12. Complementary Studies Course (one half-course equivalent)

Civil Engineering with a Minor in Environmental Engineering

1., 2. ENCI 570 Group Design Project (two half-course equivalents)
3. ENGG 513 The Role and Responsibilities of the Professional Engineer in Society
4. - 8. Environmental Engineering Technical Electives, selected from Group A (see electives list below) (five half-course equivalents)
9. - 11. Civil Engineering Technical Electives, selected from Group B (see electives list below) (three half-course equivalents)
12. Complementary Studies Course (one half-course equivalent)

Civil Engineering with a Minor in Structural Engineering

1. ENCI 545 Theory of Structures I
2. ENCI 547 Theory of Structures II
3. ENCI 555 Structural Concrete Design
4. ENCI 557 Structural Steel Design
5., 6. ENCI 570 Group Design Project (two half-course equivalents)
7. ENGG 513 The Role and Responsibilities of the Professional Engineer in Society
8. One of ENCI 513 Properties of Concrete and Masonry, or ENCI 523 Soil Mechanics and Foundation Engineering
9. One of (a) EVDA 511 Building Science and Technology I - a minimum GPA of 2.70 is required to register, (b) EVDA 719 Structures for Architects III - a minimum GPA of 3.00 is required to register, (c) ENCI 525 Applied Geotechnical Engineering, (d) an approved course on the Design of Wood, (e) ENCI 553 Structural Masonry Design, (f) an approved course on Structural Biomechanics
10., 11. Technical Electives (two half-course equivalents not otherwise taken)
12. Complementary Studies Course (one half-course equivalent)

Civil Engineering with a Minor in Transportation Engineering

1., 2. ENCI 570 Group Design Project (two half-course equivalents)
3. ENCI 573 Highway Engineering
4. ENCI 575 Operation of Transportation Systems
5. ENCI 577 Modelling of Transportation Systems
6. ENCI 579 Asphalt Pavement Design and Management
7. ENGG 513 The Role and Responsibilities of the Professional Engineer in Society
8. TRAN 599 Independent Research in Transportation Issues
9. - 11. Technical Electives (three half-course equivalents)
12. Complementary Studies Course (one half-course equivalent)

Regular program.
Select eight half-course equivalents.

ENCI 513 Properties of Concrete and Masonry
ENCI 523 Soil Mechanics and Foundation Engineering
ENCI 525 Applied Geotechnical Engineering
ENCI 533 Engineering Hydrology
ENCI 535 Open Channel Hydraulics
ENCI 545 Theory of Structures I
ENCI 547 Theory of Structures II

ENCI 553 Structural Masonry Design

ENCI 555 Structural Concrete Design
ENCI 557 Structural Steel Design
ENCI 573 Highway Engineering
ENCI 575 Traffic Engineering and Operations
ENCI 577 Modelling of Transportation Systems
ENCI 579 Asphalt Pavement Design and Management
ENCI 581 Water and Wastewater Engineering
ENCI 587 Site Assessment and Remediation
ENCI 589 Air and Water Pollution
ENCI 591 Solid and Hazardous Waste Engineering
ENCI 595 Special Topics
ENCI 597 Civil Engineering Project I
ENCI 599 Civil Engineering Project II

Environmental Engineering Minor.
Five half-course equivalents in Group A and select three half-course equivalents from Group B.

Group A Technical Electives
ENCI 581 Water and Wastewater Engineering
ENCI 587 Site Assessment and Remediation
ENCI 589 Air and Water Pollution
ENCI 591 Solid and Hazardous Waste Engineering
GLGY 401 Physical Hydrology

Group B Technical Electives
ENCI 513 Properties of Concrete and Masonry
ENCI 523 Soil Mechanics and Foundation Engineering
ENCI 525 Applied Geotechnical Engineering
ENCI 533 Engineering Hydrology
ENCI 535 Open Channel Hydraulics
ENCI 545 Theory of Structures I
ENCI 547 Theory of Structures II
ENCI 555 Structural Concrete Design
ENCI 557 Structural Steel Design
ENCI 573 Highway Engineering
ENCI 575 Traffic Engineering and Operations
ENCI 577 Modelling of Transportation Systems
ENCI 579 Asphalt Pavement Design and Management
ENCI 595 Special Topics

Structural Engineering Minor.
Select two half-course equivalents.

ENCI 513 Properties of Concrete and Masonry
ENCI 523 Soil Mechanics and Foundation Engineering
ENCI 525 Applied Geotechnical Engineering
ENCI 533 Engineering Hydrology
ENCI 535 Open Channel Hydraulics

ENCI 553 Structural Masonry Design
ENCI 573 Highway Engineering
ENCI 575 Traffic Engineering and Operations
ENCI 577 Modelling of Transportation Systems
ENCI 579 Asphalt Pavement Design and Management
ENCI 581 Water and Wastewater Engineering
ENCI 587 Site Assessment and Remediation
ENCI 589 Air and Water Pollution
ENCI 591 Solid and Hazardous Waste Engineering
ENCI 595 Special Topics

Transportation Engineering Minor.
Select three half-course equivalents.

ENCI 513 Properties of Concrete and Masonry
ENCI 523 Soil Mechanics and Foundation Engineering
ENCI 525 Applied Geotechnical Engineering
ENCI 533 Engineering Hydrology
ENCI 535 Open Channel Hydraulics
ENCI 545 Theory of Structures I
ENCI 547 Theory of Structures II
ENCI 555 Structural Concrete Design
ENCI 557 Structural Steel Design
ENCI 581 Water and Wastewater Engineering
ENCI 587 Site Assessment and Remediation
ENCI 589 Air and Water Pollution
ENCI 591 Solid and Hazardous Waste Engineering
ENCI 595 Special Topics

Note: All technical-elective courses have similar workloads even though the hours in the timetable are variable. One 500-level or higher course from either the Faculty of Science or the Faculty of Engineering may be approved by the Department Head as a technical elective. Optional undergraduate courses and all graduate courses are offered, in any calendar year, at the discretion of the department.

Refer to "Faculty Regulations - Admissions" above.

See also "First Year Curriculum Requirements Common to All Programs" above.

1. AMAT 307 Differential Equations
2. CPSC 331 Information Structures
3. ENCM 339 Programming Fundamentals
4. ENCM 369 Computer Organization
5. ENEL 327 Signals and Transforms
6. ENEL 341 Circuits I
7. ENEL 343 Circuits II
8. ENEL 353 Digital Circuits
9. ENGG 319 Probability and Statistics for Engineers
10. MATH 271 Discrete Mathematics
11. PHYS 369 Acoustics, Optics and Radiation for Engineers

1. CPSC 441 Computer Communications
2. CPSC 457 Principles of Operating Systems
3. ENCM 417 Computer Interfacing and Embedded Systems
4. ENCM 467 Digital Electronics for Computer Engineers
5. ENCM 491 Real-Time Systems Design
6. ENCM 493 Software Development for Computer Engineers
7. ENEL 441 Control Systems I
8. ENEL 453 Digital Systems Design
9. ENEL 471 Analog Communications
10., 11. Complementary Studies Courses (two half-course equivalents)

1. CPSC 411 Compiler Construction
2. ENCM 501 Principles of Computer Architecture
3. ENCM 583 Fourth Year Computer Engineering Team Design Project, Part A
4. ENCM 589 Fourth Year Computer Engineering Team Design Project, Part B
5. ENGG 513 The Role and Responsibilities of the Professional Engineer in Society
6. - 10. Technical Electives (five half-course equivalents)
11., 12. Complementary Studies Courses (two half-course equivalents)
Block Course - ENCM 007 Introduction to the Fourth Year Computer Engineering Team Design Project (16 hours)

Select five
half-course
equivalents

CPSC 453 Introduction to Computer Graphics

CPSC 471 Data Base Management Systems

ENCM 503 Digital Video Processing

ENCM 505 Parallel Computer Architectures

ENCM 515 Digital Signal Processors

ENCM 519 Special Topics in Computer Engineering

ENCM 591 Individual Computer Engineering Project, Part II (1 session)

ENCM 598 Individual Computer Engineering Research Project (2 sessions, two half-course equivalents)

ENCM 599 Individual Computer Engineering Project (1 session)

ENEL 525 Neuro-Fuzzy and Soft Computing

ENEL 527 Design and Implementation of FPGA-Based DSP Systems

ENEL 529 Wireless Communications Systems

ENEL 541 Control Systems II

ENEL 563 Biomedical Signal Analysis

ENEL 567 CMOS VLSI Engineering

ENEL 571 Digital Communications

ENEL 573 Telecommunications and Computer Communications

ENEL 593 Digital Filters

Note: Selection of a course not on this list requires department approval. Elective courses are offered, in any calendar year, at the discretion of the department.

Note: Students may not take CPSC 471 as a technical elective if they have already completed ENSF 519.31 or ENCM 519.31.

Refer to "Faculty Regulations - Admissions" above.

See also "First Year Curriculum Requirements Common to All Programs" above.

1. AMAT 307 Differential Equations
2. AMAT 309 Vector Calculus for Engineers
3. ENCM 339 Programming Fundamentals
4. ENCM 369 Computer Organization
5. ENEL 327 Signals and Transforms
6. ENEL 341 Circuits I
7. ENEL 343 Circuits II
8. ENEL 353 Digital Circuits
9. ENEL 361 Electronic Materials
10. ENGG 319 Probability and Statistics for Engineers
11. PHYS 369 Acoustics, Optics and Radiation for Engineers

1. ENCM 415 Assembly Language Programming and Interfacing
2. ENEL 409 Principles of Software Development
3. ENEL 441 Control Systems I
4. ENEL 453 Digital Systems Design
5. ENEL 463 Electronic Devices and Circuits
6. ENEL 465 Analog Integrated Electronics
7. ENEL 471 Analog Communications
8. ENEL 475 Fundamentals of Electromagnetic Fields
9. ENEL 489 Electric Machines: Steady-State
10., 11. Complementary Studies Courses (two half-course equivalents)

1. ENEL 583 Fourth Year Electrical Engineering Team Design Project, Part A
2. ENEL 589 Fourth Year Electrical Engineering Team Design Project, Part B
3. ENEL 587 Power Systems: Steady State
4. ENGG 513 The Role and Responsibilities of the Professional Engineer in Society
5. - 10. Technical Electives (six half-course equivalents)
11., 12. Complementary Studies Courses (two half-course equivalents)
Block Course - ENEL 007 Introduction to the Fourth Year Electrical Engineering Team Design Project (16 hours)

Select six half-course equivalents.

ENCM 503 Digital Video Processing

ENCM 515 Digital Signal Processors

ENEL 519 Special Topics in Electrical Engineering
ENEL 525 Neuro-Fuzzy and Soft Computing

ENEL 527 Design and Implementation of FPGA-Based DSP Systems

ENEL 529 Wireless Communications Systems

ENEL 541 Control Systems II

ENEL 559 Analog Filter Design

ENEL 563 Biomedical Signal Analysis

ENEL 565 Digital Integrated Electronics
ENEL 567 CMOS/VLSI Engineering
ENEL 569 Electronics for Instrumentation
ENEL 571 Digital Communications
ENEL 573 Telecommunications and Computer Communications
ENEL 575 Microwave Circuits and Antennas
ENEL 577 Transmission Media
ENEL 579 Optical Fibre Communications
ENEL 585 Introduction to Power Electronics
ENEL 591 Individual Project, Part II
ENEL 593 Digital Filters
ENEL 598 Individual Research Project (two half-course equivalents)
ENEL 599 Individual Project

Note: Selection of a course not on this list requires department approval. Elective courses are offered, in any calendar year, at the discretion of the department.

Refer to "Faculty Regulations - Admissions" above.

See also "First Year Curriculum Requirements Common to All Programs" above.

1. AMAT 307 Differential Equations
2. AMAT 309 Vector Calculus for Engineers
3. ENEL 327 Signals and Transforms
4. ENGG 319 Probability and Statistics for Engineers
5. ENGG 325 Electric Circuits and Systems
6. ENGG 335 Computing for Engineers II
7. ENGG 349[ENGG349[ Engineering Mechanics II
8. ENGO 343 Fundamentals of Surveying
9. ENGO 351 Introduction to Geospatial Information Systems
10. ENGO 361 Least Squares Estimation
11. PHYS 369 Acoustics, Optics and Radiation for Engineers

1. ENGG 407 Numerical Methods in Engineering
2. ENGO 419 Geomatics Networks
3. ENGO 421 Coordinate Systems

4. ENGO 423 Geodesy
5. ENGO 431 Analytical Photogrammetry
6. ENGO 435 Remote Sensing

7. ENGO 451 Design and Implementation of Geospatial Information Systems
8. ENGO 455 Land Tenure and Cadastral Systems

9. ENGO 465 Satellite Positioning
10., 11. Complementary Studies Courses (two half-course equivalents)

1. ENGG 513 The Role and Responsibilities of the Professional Engineer in Society
2., 3. ENGO 500 Geomatics Engineering Project (two half-course equivalents)
4. ENGO 501 Field Surveys
5. - 10. Technical Electives (six half-course equivalents)
11., 12. Complementary Studies Courses (two half-course equivalents)

Select six half-course equivalents.

BSEN 395 Business Law for Strategic Decision Makers

ENGO 531 Advanced Photogrammetric and Ranging Techniques

ENGO 545 Hydrography

ENGO 551 Special Topics in Geospatial Information Systems
ENGO 559 Digital Imaging and Applications
ENGO 563 Data Analysis in Engineering
ENGO 567 High-Precision Surveys
ENGO 573 Digital Terrain Modelling
ENGO 579 Survey Law
ENGO 581 Land Use Planning
ENGO 583 Environmental Modelling

ENGO 585 Wireless Location

Notes:

1. A 400-level or higher technical course from the Faculty of Science or another Engineering department may be substituted for a technical elective with permission of the Head of the Department of Geomatics Engineering.

2. Technical electives in the undergraduate program and all graduate courses are offered, in any academic year, at the discretion of the department.

3. Students are eligible to obtain a Certificate of Completion from the Western Canadian Board of Examiners (WCBE) for Land Surveyors upon completion of approved courses on the following subjects, in addition to the required courses within the Geomatics Engineering program (WCBE examinations are noted in parentheses): Canadian Economic, Legal and Business Systems (II-6); Hydrography (II-2), Survey Law (II-3) and Land Use Planning and Environmental Management (II-4). For more information on the WCBE go to their website: www.geomatics.ucalgary.ca/wcbe/index.htm

Refer to "Faculty Regulations - Admissions" above.

See also "First Year Curriculum Requirements Common to All Programs" above.

Manufacturing Engineering, regular program and Minor in Mechatronics

1. AMAT 307 Differential Equations
2. CHEM 357 Industrial Organic Chemistry for Engineers
3. ENGG 311 Engineering Thermodynamics
4. ENGG 319 Probability and Statistics for Engineers
5. ENGG 317 Mechanics of Solids
6. ENGG 325 Electric Circuits and Systems
7. ENGG 349 Engineering Mechanics II
8. ENGG 407 Numerical Methods in Engineering

9. ENME 337 Computing Tools for Engineering Design
10. ENME 341 Fundamentals of Fluid Mechanics
11. PHYS 369 Acoustics, Optics and Radiation for Engineers
Block Course - ENME 001 Mechanical and Manufacturing Engineering Block Course (32 hours)

Manufacturing Engineering, regular program and Minor in Mechatronics

1. ENME 421 Materials I
2. ENME 461 Mechatronics
3. ENMF 401 Computer-Aided Design and Graphics
4. ENMF 405 Mechanics of Materials
5. ENMF 407 Human Behaviour in Organizations
6. ENMF 411 Quality Assurance
7. ENMF 415 Integrated Manufacturing Systems I
8. ENMF 417 Manufacturing and Production Processes

9. ENMF 473 Kinematics and Dynamics of Machines
10., 11. Complementary Studies Courses (two half-course equivalents)

Manufacturing Engineering, regular program

1. ENGG 513 The Role and Responsibilities of the Professional Engineer in Society
2., 3. ENMF 512 Manufacturing Engineering Design Methodology and Application (two half-course equivalents)
4. ENMF 521 Manufacturing Practicum*
5. ENMF 533 Elements of Automation
6. - 9. Technical Electives (four half-course equivalents)
10., 11. Complementary Studies Courses (two half-course equivalents)
* Occurs over a 2-week period during the Summer Session. This course may be taken prior to third year (subject to space limitations). Contact department for dates.

Note: Students are encouraged to select technical electives from a similar area in order to specialize in a subject stream. The subject streams for the manufacturing engineering technical electives are: Automation (ENME 585, 599, ENMF 503, 505, 513, 515, 529), Manufacturing Systems (ENMF 501, 507, 509, 513, 527), and Design and Manufacturing Processes (ENME 521, 547, ENMF 503, 517).

Manufacturing Engineering with a Minor in Mechatronics

1. ENGG 513 The Role and Responsibilities of the Professional Engineer in Society
2., 3. ENME 560 Mechatronics Design Laboratory (two half-course equivalents)
4. ENME 585 Control Systems
5., 6. ENMF 512 Manufacturing Engineering Design Methodology and Application (two half-course equivalents)
7. ENMF 521 Manufacturing Practicum*
8. ENMF 533 Elements of Automation
9., 10. Technical Electives (two half-course equivalents)
11., 12. Complementary Studies Courses (two half-course equivalents)
* Occurs over a 2-week period during the Summer Session. This course may be taken prior to third year (subject to space limitations). Contact department for dates.

Regular program.
Select four half-course equivalents.

ENME 521 Materials II
ENME 547 Finite Element Method
ENME 585 Control Systems

ENME 599 Vibrations and Machine Dynamics
ENMF 501 Modelling and Simulation of Manufacturing Systems
ENMF 503 Computer Numerically Controlled Machines
ENMF 505 Robotics
ENMF 507 Organization and Technical Management in Manufacturing

ENMF 509 Integrated Manufacturing Systems II
ENMF 513 Artificial Intelligence in Manufacturing
ENMF 515 Computer-Based Control for Manufacturing

ENMF 517 Experimental Design and Analysis
ENMF 519 Special Topics in Manufacturing Engineering
ENMF 527 Production and Project Engineering
ENMF 529 Introduction to Microelectromechanical Systems

Minor in Mechatronics. Select two half-course equivalents.

ENME 547 Finite Element Method
ENME 599 Vibrations and Machine Dynamics
ENMF 505 Robotics
ENMF 513 Artificial Intelligence in Manufacturing
ENMF 515 Computer-Based Control for Manufacturing
ENMF 529 Introduction to Microelectromechanical Systems

Refer to "Faculty Regulations - Admissions" above.

See also "First Year Curriculum Requirements Common to All Programs" above.

Mechanical Engineering, regular program and Minors in Mechatronics and Petroleum Engineering

1. AMAT 307 Differential Equations
2. CHEM 357 Industrial Organic Chemistry for Engineers
3. ENGG 311 Engineering Thermodynamics
4. ENGG 319 Probability and Statistics for Engineers
5. ENGG 317 Mechanics of Solids
6. ENGG 325 Electric Circuits and Systems
7. ENGG 349 Engineering Mechanics II
8. ENGG 407 Numerical Methods in Engineering

9. ENME 337 Computing Tools for Engineering Design
10. ENME 341 Fundamentals of Fluid Mechanics
11. PHYS 369 Acoustics, Optics and Radiation for Engineers
Block Course - ENME 001 Mechanical and Manufacturing Engineering Block Course (32 hours)

Mechanical Engineering, regular program and Minors in Mechatronics and Petroleum Engineering

1. ENME 421 Materials I
2. ENME 461 Mechatronics
3. ENME 471 Heat Transfer
4. ENME 473 Fundamentals of Kinematics and Dynamics of Machines
5. ENME 479 Mechanics of Materials I
6. ENME 485 Mechanical Engineering Thermodynamics
7. ENME 493 Machine Component Design
8. ENME 495 Fluid Mechanics
9. ENMF 417 Manufacturing and Production Processes

10., 11. Complementary Studies Courses (two half-course equivalents)

Mechanical Engineering, regular program

1. ENGG 513 The Role and Responsibilities of the Professional Engineer in Society
2., 3. ENME 538 Mechanical Engineering Design Methodology and Application (two half-course equivalents)
4. ENME 585 Control Systems
5. ENME 599 Vibrations and Machine Dynamics
6. - 9. Technical Electives (four half-course equivalents)
10., 11. Complementary Studies Courses (two half-course equivalents)

Mechanical Engineering with a Minor in Mechatronics

1. ENGG 513 The Role and Responsibilities of the Professional Engineer in Society
2., 3. ENME 538 Mechanical Engineering Design Methodology and Application (two half-course equivalents)
4., 5. ENME 560 Mechatronics Design Laboratory (two half-course equivalents)
6. ENME 585 Control Systems
7. ENME 599 Vibrations and Machine Dynamics
8. ENMF 533 Elements of Automation
9., 10. Technical Electives (two half-course equivalents)
11., 12. Complementary Studies Courses (two half-course equivalents)

Mechanical Engineering with a Minor in Petroleum Engineering

1. ENGG 513 The Role and Responsibilities of the Professional Engineer in Society
2., 3. ENME 538 Mechanical Engineering Design Methodology and Application (two half-course equivalents)
4. ENPE 523 Introduction to Reservoir Engineering
5. - 9. Technical Electives (five half-course equivalents)
10., 11. Complementary Studies Courses (two half-course equivalents)

Regular program.
Select four half-course equivalents.

ENME 519 Special Topics
ENME 521 Materials II

ENME 523 Biomechanics of Joints
ENME 547 Finite Element Method

ENME 583 Mechanical Systems in Buildings
ENME 587 Mechanics of Materials II
ENME 593 Energy Systems
ENME 595 Gas Dynamics
ENME 597 Turbomachinery
ENMF 401 Computer-Aided Design and Graphics
ENMF 415 Integrated Manufacturing Systems I
ENMF 503 Computer Numerically Controlled Machines
ENMF 505 Robotics
ENMF 515 Computer-Based Control for Manufacturing

ENMF 517 Experimental Design and Analysis
ENMF 527 Production and Project Engineering
ENMF 529 Introduction to Microelectromechanical Systems
ENPE 555 Oil & Gas Field Safety and Environment
ENPE 561 Fuel Science and Technology
ENPE 563 Materials Aspects of Oil & Gas Production
ENPE 565 Mechanics of Oil & Gas Production

Minor in Mechatronics. Select two half-course equivalents.

ENME 547 Finite Element Method
ENMF 505 Robotics
ENMF 513 Artificial Intelligence in Manufacturing
ENMF 515 Computer-Based Control for Manufacturing
ENMF 529 Introduction to Microelectromechanical Systems

Minor in Petroleum Engineering.
Select five half-course equivalents.

ENME 595 Gas Dynamics

ENME 597 Turbomachinery
ENPE 525 Waterflooding
ENPE 533 Petroleum Production Engineering
ENPE 555 Oil & Gas Field Safety and Environment
ENPE 561 Fuel Science and Technology
ENPE 563 Materials Aspects of Oil & Gas Production
ENPE 565 Mechanics of Oil & Gas Production
GLGY 377 Petroleum Engineering Geology

Refer to "Faculty Regulations - Admissions" above.

See also "First Year Curriculum Requirements Common to All Programs" above.

1. AMAT 307 Differential Equations for Engineers
2. CHEM 357 Industrial Organic Chemistry for Engineers
3. ENCH 315 Chemical Engineering Process Calculation
4. ENCH 331 Process Fluid Dynamics
5. ENGG 319 Probability and Statistics for Engineers
6. ENGG 325 Electric Circuits and Systems
7. ENGG 335 Computing for Engineers II
8. ENGG 311 Engineering Thermodynamics
9. ENGG 317 Mechanics of Solids
10. ENGG 349 Engineering Mechanics II
11. GLGY 377 Petroleum Engineering Geology

1. ENCH 401 Analyses in Chemical, Oil & Gas Engineering
2. ENCH 403 Heat and Mass Transfer
3. ENCH 405 Separation Processes I
4. ENCH 427 Chemical Engineering Thermodynamics
5. ENPE 423 Oil & Gas Engineering Process Development
6. ENPE 507 Well Logging and Formation Evaluation
7. ENPE 515 Drilling and Well Completions
8. ENPE 523 Introduction to Reservoir Engineering
9. ENPE 525 Waterflooding
10. ENPE 533 Petroleum Production Engineering
11. Complementary Studies Course (one half-course equivalent)

1. ENGG 407 Numerical Methods in Engineering
2. ENGG 513 The Role and Responsibilities of the Professional Engineer in Society

3. ENCH 501 Transport Processes
4. ENPE 511 Design for Oil & Gas Engineering I
5. ENPE 513 Flow in Porous Media
6. ENPE 531 Design for Oil & Gas Engineering II
7. ENPE 551 Petroleum Engineering Laboratory
8., 9. Technical Electives (two half-course equivalents)
10. - 12. Complementary Studies Courses (four half-course equivalents)

Select two half-course equivalents.

CHEM 579 Surface and Colloid Chemistry for Engineers

ENCH 503 Upgrading and Refining Processes
ENCH 535 Principles of Biochemical Engineering
ENCH 537 Computational Thermodynamics
ENPE 509 Well Testing

ENPE 519 Special Topics
ENPE 543 Geological Characterization of Oil and Gas Reservoirs
ENPE 555 Oil & Gas Field Safety and Environment
ENPE 561 Fuel Science and Technology
ENPE 563 Materials Aspects of Oil & Gas Production

Refer to "Faculty Regulations - Admissions" above.

See also "First Year Curriculum Requirements Common to All Programs" above.

1. AMAT 307 Differential Equations
2. CPSC 331 Information Structures
3. ENCM 339 Programming Fundamentals
4. ENCM 369 Computer Organization
5. ENEL 327 Signals and Transforms
6. ENEL 329 Circuits for Software Engineers
7. ENEL 353 Digital Circuits
8. ENGG 319 Probability and Statistics for Engineers
9. MATH 271 Discrete Mathematics
10. PHYS 369 Acoustics, Optics and Radiation for Engineers
11. Complementary Studies Course (one half-course equivalent)

1. CPSC 349 Programming Paradigms

2. CPSC 441 Computer Communications
3. CPSC 457 Principles of Operating Systems
4.CPSC 471 Data Base Management Systems
5. ENCM 417 Computer Interfacing and Embedded Systems
6. ENCM 491 Real-Time System Design
7. SENG 311 Principles of Software Engineering
8. SENG 411 Human and Organizational Aspects in Software Engineering
9. SENG 421 Software Metrics
10. SENG 443 Software Architectures
11. Complementary Studies Course (one half-course equivalent)

1. CPSC 411 Compiler Construction
2. ENGG 513 The Role and Responsibilities of the Professional Engineer in Society
3. ENSF 583 Fourth Year Software Team Design Project, Part A
4. ENSF 589 Fourth Year Software Team Design Project, Part B
5. SENG 521 Software Reliability and Testing
6. - 9. Technical electives (four half-course equivalents)
10., 11. Complementary Studies Courses (two half-course equivalents)
Block Course - ENSF 007 Introduction to the Fourth Year Software Engineering Team Design Project (16 hours)

Select four half-course equivalents.

CPSC 453 Introduction to Computer Graphics
CPSC 471 Data Base Management Systems
ENCM 503 Digital Video Processing
ENCM 505 Parallel Computer Architectures
ENCM 515 Digital Signal Processors
ENEL 525 Neuro-Fuzzy and Soft Computing
ENEL 529 Wireless Communications Systems

ENEL 563 Biomedical Signal Analysis
ENEL 571 Digital Communications
ENEL 573 Telecommunication and Computer Communications
ENEL 593 Digital Filters
ENSF 519 Special Topics in Software Engineering
ENSF 591 Individual Software Engineering Project, Part II (1 session)
ENSF 598 Individual Software Engineering Research Project (2 sessions, two half-course equivalents)
ENSF 599 Individual Software Engineering Project (1 session)
SENG 501 Advanced Topics in Software Engineering
SENG 511 Software Process Improvement
SENG 513 Web Engineering
SENG 523 Formal Methods
SENG 531 Software Evolution
PHIL 279 Logic I or PHIL 377 Elementary Formal Logic

Note: Selection of a course not on this list requires department approval. Elective courses are offered, in any calendar year, at the discretion of the department.
Note: CPSC 471, Data Base Management Systems, may be used as a technical elective only by students whose programs did not include CPSC 471 as a required course.

Note: Students may not take CPSC 471 as a technical elective if they have already completed ENSF 519.31 or ENCM 519.31.

Introduction

The Biomedical Engineering Specialization (BMEN) allows a student to fulfill the requirements for a BSc degree in Civil, Chemical, Electrical, Geomatics, Manufacturing or Mechanical Engineering and at the same time complete a program in Biomedical Engineering.

Admission

First year Engineering students wishing to enter the Biomedical Engineering Specialization must apply for admission to the Biomedical Engineering Specialization program at the same time the choice of an engineering program is made.

Requirements

See also "First Year Curriculum Requirements Common to All Programs" above.

The second year Biomedical Engineering Specialization program is the same as the second year programs in Chemical, Civil, Electrical, Geomatics, Manufacturing or Mechanical Engineering regular programs above with the change that all Biomedical Engineering Specialization students take:

BMEN 309 Anatomy and Physiology for Engineers

BMEN 319 Applied Statistics for the Experimental Sciences

BMEN 327 Electrical Circuits for Biomedical Engineers

Block Course - BMEN 003 Health Care Management

Note: BMEN 319 is taken in place of ENGG 319. BMEN 327 is taken in place of ENGG 325 for Civil, Chemical, Geomatics, Manufacturing and Mechanical Engineering students and in place of ENEL 341 for Electrical Engineering students.

The third year Biomedical Engineering Specialization program is the same as the third year programs in Chemical, Civil, Electrical, Geomatics, Manufacturing or Mechanical Engineering regular programs above with the change that Biomedical Engineering Specialization students take:

Block Course - BMEN 005 Introduction to Biomedical Engineering Research

and

Chemical

9. BMEN Technical Elective

12. BMEN Core Elective

Civil

12. BMEN Core Elective

Electrical

12. BMEN Core Elective

Geomatics

12. BMEN Core Elective

Manufacturing and Mechanical

12. BMEN Core Elective

Note: Biomedical Engineering Specialization students select one Biomedical Engineering Core Elective from three available.

BMEN 405 Biological Tissue and System Mechanics

BMEN 407 Cell Culture and Tissue Engineering

BMEN 409 Bioelectricity

4th Year

The fourth year Biomedical Engineering Specialization program is the same as the fourth year programs in Chemical, Civil, Electrical, Geomatics, Manufacturing or Mechanical Engineering regular programs above with the change that Biomedical Engineering Specialization students take:

Chemical

3. BMEN Technical Elective

7. BMEN 500 Biomedical Engineering Research Thesis

9., 10. BMEN 500 Biomedical Engineering Research Thesis

Civil

6., 7. BMEN Technical Elective

8. - 10. BMEN 500 Biomedical Engineering Research Thesis

11. Complementary Studies

12. BMEN Core Elective

Electrical

6., 7. BMEN Technical Elective

8. - 10. BMEN 500 Biomedical Engineering Research Thesis

Geomatics

6., 7. BMEN Technical Elective

8. - 10. BMEN 500 Biomedical Engineering Research Thesis

Manufacturing and Mechanical

6., 7. BMEN Technical Elective

8., 9. BMEN 500 Biomedical Engineering Research Thesis

12. BMEN 500 Biomedical Engineering Research Thesis

Note: Students in Electrical and Geomatics still take one and students in Civil still take two approved Technical electives from their respective regular programs.

Biomedical Engineering Approved Technical Electives

BMEN 509 Medical Image Processing and Biometrology

BMEN 511 Materials and Biocompatibility

BMEN 513 Advanced Numerical Techniques for Engineering and Natural Systems

BMEN 515 Biosystems Modelling Methodologies

BMEN 517 Experimental and Analytic Human Dynamics

BMEN 521 Musculoskeletal Biomechanics

ENCH 535 Principles of Biochemical Engineering

ENCH 541 Introduction to Cell and Tissue Engineering

ENEL 519.11 Biomedical Instrumentation

ENEL 563 Biomedical Signal Analysis

ENME 523 Biomechanics of Joints

Practicum

All Biomedical Engineering Specialization students are required to fulfill Practicum requirements. This can be satisfied either through a regular Engineering Internship placement (between the third and fourth academic years) or through three summer Biomedical Engineering Specialization Practicum placements (totaling at least 12 months). Experience must be obtained with a suitable bio-engineering company/research laboratory or university research laboratory. All placements must be approved in advance by the Director of the Engineering Internship Program.

An engineering undergraduate degree program may be combined with any other undergraduate degree program on campus. Students may either be admitted to two degree programs when they first apply to the University or may seek admission to a second degree program after being admitted to engineering. Students are reminded that all degree programs at the University of Calgary are subject to quotas and it is the student's responsibility to meet the admission requirements for the second degree program. Students should consult the engineering website or inquire at the Engineering Undergraduate Studies Office for more information.

Refer to "Faculty Regulations - Admissions" above.

Note: A quota applies to admission to the Psychology program. Students wishing to pursue a combined degree in Engineering and Psychology must consult the Associate Dean (Student Affairs) in the Faculty of Engineering regarding admission procedures.

A combined Engineering degree and a BA degree in Humanities or a BA or BSc in Social Sciences can be obtained by taking a prescribed program over a period of five years. The framework of this program is summarized as follows (there are slight variations depending upon the combined degree sought):

1st Year

Four and one-half full-course equivalents from the first year engineering program
One full-course equivalent from Humanities/Social Sciences Major

2nd Year

One half-course equivalent from the first year engineering program
Two and one-half full-course equivalents from the second year engineering program
Two full-course equivalents from Humanities/Social Sciences Major
One full-course equivalent from the Engineering Complementary Studies requirement

3rd Year

Three full-course equivalents from second year engineering program
Two full-course equivalents from Humanities/Social Sciences Major
One of Communications Studies 361 or 363

4th Year

Required courses from third year engineering specialization
One full-course equivalent from Humanities/Social Sciences Major

5th Year

Required courses from fourth year engineering specialization
One full-course equivalent from Humanities/Social Sciences Major
Engineering 513

Students planning a Humanities Major in French or German should present Alberta Grade XII standing in the subject area. Programs of students in the combined degrees will be approved by the associate deans of both faculties. Upon successful completion of the program requirements students will receive two degree parchments.

Note: Students seeking a BA in International Relations in the Faculty of Social Sciences must fulfill the requirement of two full-course equivalents in a modern language other than English in addition to the requirements listed above.

It is possible for students to opt out of a combined degree program after one year and complete either the BSc (Engineering) or the Humanities or Social Sciences degree in the normal time.

The Faculty of Engineering sponsors a diploma program providing additional special qualifications in designated departments which lead to the Diploma of the Faculty of Engineering. The designated departments offering the diploma program are: Chemical and Petroleum; Civil; Electrical and Computer; and Mechanical and Manufacturing Engineering. This program is intended primarily for professional engineers engaged in practice who are not interested in submitting to the discipline of a true graduate degree including a thesis, or who are unable to meet the residence requirements of the MSc degree.

Admission to the diploma program may be granted to holders of an approved degree or its equivalent. Engineers, without a degree, who are registered as Professional Engineers with the Association of Professional Engineers, Geologists and Geophysicists of Alberta, or an equivalent association, may also be eligible for admission to the diploma program.

The diploma program consists of eight half courses of which at least four must be graduate courses in engineering. Courses which normally fall within an undergraduate program in the same area in which the diploma is sought will not be credited toward the diploma.

A student must obtain a grade point average of at least 2.50 in the courses taken for credit toward the diploma. The minimum passing grade in courses taken for credit in the diploma program is "C."

Enquiries about the diploma program should be directed to the department in which the diploma is sought.

The Faculty of Engineering also sponsors a diploma program providing additional specialization in Environmental Engineering, intended for professional engineers or holders of equivalent approved degrees and leading to the Diploma of the Faculty of Engineering in Environmental Engineering. The admission criteria, requirements and regulations for the diploma are the same as for the Diploma of the Faculty of Engineering. Enquiries about the specialization in Environmental Engineering should be directed to the Department of Civil Engineering.

The Faculty of Engineering and the Haskayne School of Business jointly sponsor a diploma program providing additional special qualifications in the area of Project Management which leads to the Diploma of the Faculty of Engineering and of the Haskayne School of Business in Project Management. This program is intended primarily for professionals engaged in practice who are not interested in the MSc or MEng degrees.

Admission to the diploma program may be granted to holders of an approved Engineering degree, Engineers without a degree who are registered with APEGGA or an equivalent association, and those having equivalent qualifications or experience as determined by the Director of the Project Management specialization.

Criteria for admission to the Diploma with a Specialization in Project Management of the Faculty of Engineering and the Haskayne School of Business are as follows:

1. An approved Engineering degree
or
registration with APEGGA or an equivalent association
or
equivalent qualifications or experience as determined by the Director of the Project Management Specialization;

2. Up to five years of relevant experience in industry as determined by the Director of the Project Management Specialization;

3. Successful completion of up to four courses in the Project Management Specialization with a grade point average of at least 2.50, and a minimum passing grade of "C" for all courses.

The diploma program consists of eight half courses of which at least six must be graduate courses in project management. Courses which fall within an undergraduate program in the area of Project Management will not normally be credited toward the diploma.

A student must obtain a grade point average of at least 2.50 in the courses taken for credit toward the diploma. The minimum passing grade in courses taken for credit in the diploma program is "C."

Enquiries about the diploma program should be directed to the Director of the Project Management specialization.

The Engineering Internship Program is a five-year program which includes, in addition to the regular four-year academic program, an internship year (a minimum of twelve and a maximum of sixteen consecutive months) of supervised work experience in industry. The internship year may commence in May or September after the student has completed the first three years of the Engineering program. The student is expected to return to complete the final academic year of the program in September of the following year. In certain circumstances, it may be possible to commence the internship year in January, and return to the academic program the following January. Interested students are encouraged to contact either the Engineering Internship office or the Career Services Office.

Students are encouraged to apply to the Career Services Office after the completion of their second year, and before October 1 in their third year. Students who do not meet the application deadline should contact the Engineering Internship Office regarding admission.

To be provisionally admitted to the Engineering Internship Program, students must be full-time students in good academic standing after second year, and have completed the Career Development Workshop. In addition, a personal interview with the Executive Director or the Associate Director of the Engineering Internship Program is mandatory. Only students who are eligible for full-time registration in the Faculty of Engineering at the time they apply for the internship program and at the time they expect to start their internship are eligible for access to the placement processes of the Engineering Internship Program. Students are formally admitted to the program when they accept their first placement. Students should refer to the Co-operative Education/Internship section of this Calendar for general admission requirements.

Students must complete a minimum of twelve months work experience while registered in the Internship courses, Internship in Engineering 513.01-04[INTE513], in addition to the regular requirements for the BSc in Engineering. Students who have completed any portion of the twelve month requirement will not be permitted to apply for positions that extend beyond either the sixteen month maximum permitted to complete the requirements, or the date on which they are expected to resume their academic program.

If a student's academic performance in the third year results in the student being required to withdraw from the Faculty of Engineering, or being placed on probation, the student will be required to withdraw from the Engineering Internship Program. Students who have been required to withdraw from the Engineering Internship Program will no longer have access to the program's job search systems or support. If the student is required to withdraw from the Engineering Internship Program but has already accepted a placement, the employer will be informed that the student is no longer registered in the Internship Program.

Students who have completed the twelve month minimum requirement will not be permitted to apply for further internship positions.

Students who have accepted a placement obtained through the Co-op/Internship Placement process are required to register in the Internship courses corresponding to the length of the placement. Students failing to do so will be registered by the office of Cooperative Education in the appropriate course(s) and appropriate fees will be payable.

In order to have the Internship designation appear on the BSc parchment, a student must complete the twelve-month minimum requirement and pass the requisite internship courses.

Each work experience is supervised by a Professional Engineer in the host company. Normally the entire internship year is spent with the same employer. Students are required to present letter reports to the Engineering Internship Office at the end of each four month period during the internship year. In addition, a comprehensive report on the student's work experience is required at the end of the internship assignment. This comprehensive report must be approved by the student's work supervisor and is marked and graded by members of the Faculty.

The Faculty of Engineering in partnership with the Haskayne School of Business offers a Minor in Entrepreneurship and Enterprise Development (MEED) open to all engineering students. MEED typically commences in year two of the engineering program and consists of five Entrepreneurship and Innovation (ENTI) courses, all of which are currently offered by the Haskayne School of Business plus any five fourth-year engineering courses that are taken as part of the normal requirements for the engineering degree. Thus, to satisfy MEED requirements, students must receive credit for five half courses over and above the engineering degree requirements.

Students apply for admission to MEED at the same time as they apply for their choice of engineering program specialization, in April of their first year. Admission to the MEED program is limited to 50 students. In the event that the number of applicants exceeds the number of spaces available, admission will be decided on the basis of academic performance, using the same process as is used for admission to the engineering program specialization. If students apply later in their program than second year, they will be admitted in order of academic performance according to the number of spaces available. Students are encouraged to apply as soon as possible in order that the Haskayne School of Business may plan for the required number of places in the ENTI courses. Application forms are available from and should be submitted to the Undergraduate Studies Office, Faculty of Engineering. Admission to the program depends upon the availability of space in the required ENTI courses.

Students must receive credit for five half courses in addition to five fourth-year engineering courses that are part of the undergraduate engineering degree requirements. The five courses that are done in addition to the engineering degree requirements are:

1. ENTI 201 Introduction to Business Venturing

2. ENTI 381 Principles of Entrepreneurship

3. ENTI 401 Opportunity Identification

4. ENTI 405 New Venture Start-Up

5. One of the following options:

BSEN 395 Business Law for Strategic Decision-Makers*

ENTI 403 New Venture Planning

ENTI 499 Family Business Management

FNCE 341 Canadian Business Finance

FNCE 343 Personal Financial Management

HROD 321 Human Resources and Organizational Dynamics**

MGIS 321 Information Systems in Business Organizations

MKTG 341 Introduction to Marketing

OPMA 301 Introduction to Production and Operations Management**

Note: ENTI 201 and 381 must be taken first in order to fulfill prerequisite requirements for the other ENTI courses.

*Not available as an option to Geomatics Engineering students who have completed OPMA 301 as a Technical Elective in their Geomatics program.

**Not available as an option to students in Manufacturing Engineering.

Regulations of the Faculty of Engineering apply to students taking MEED courses. In order to have the Minor in Entrepreneurship and Enterprise Development appear on the student's transcript, the five-course MEED program must be completed before the student graduates.