Latest Journal Article Publications

Temporal super-resolution using smart sensors for turbulent separated flows

Manohar, K. H. / Williams, O. / Martinuzzi, R. J. / Morton, C. | 2023

Experiments in Fluids | DOI: 10.1007/s00348-023-03639-2

Advection-based temporal reconstruction technique for turbulent velocity fields

Vocke, M. / Kapulla, R. / Morton, C. / Klein, M. / Martinuzzi, R. J. | 2023

Physics of Fluids | DOI: 10.1063/5.0129564

Effect of harmonic inflow perturbation on the wake vortex dynamics of a cylinder undergoing two-degree-of-freedom vortex-induced vibration near a plane boundary

Hassanpour, M. / Morton, C. / Martinuzzi, R. J. | 2022

Physics of Fluids | DOI: 10.1063/5.0115610

Effect of boundary layer state on the wake of a cantilevered square cylinder of aspect ratio 4

Mohammadi, A. / Morton, C. / Martinuzzi, R. J. | 2022

Physical Review Fluids | DOI: 10.1103/PhysRevFluids.7.084702

Tomographic piv investigation of vortex shedding topology for a cantilevered circular cylinder

Crane, R. J. / Popinhak, A. R. / Martinuzzi, R. J. / Morton, C. | 2022

Journal of Fluid Mechanics | DOI: 10.1017/jfm.2021.904

All Journal Articles

A sortable and searchable table of all articles published in peer-reviewed journals by current or former LTRAC members.

Authors Title Journal Year DOI Link
Manohar, K. H.; Williams, O.; Martinuzzi, R. J. & Morton, C. Temporal super-resolution using smart sensors for turbulent separated flows Experiments in Fluids 2023 10.1007/s00348-023-03639-2
Vocke, M.; Kapulla, R.; Morton, C.; Klein, M. & Martinuzzi, R. J. Advection-based temporal reconstruction technique for turbulent velocity fields Physics of Fluids 2023 10.1063/5.0129564
Hassanpour, M.; Morton, C. & Martinuzzi, R. J. Effect of harmonic inflow perturbation on the wake vortex dynamics of a cylinder undergoing two-degree-of-freedom vortex-induced vibration near a plane boundary Physics of Fluids 2022 10.1063/5.0115610
Mohammadi, A.; Morton, C. & Martinuzzi, R. J. Effect of boundary layer state on the wake of a cantilevered square cylinder of aspect ratio 4 Physical Review Fluids 2022 10.1103/PhysRevFluids.7.084702
Yan, D.-K.; Liu, X.; Wang, Y.-J.; Shi, L.; Qin, F.; He, G.-Q. & Martinuzzi, R. J. Effect of area ratio and heat release method on the Ma = 2-6 operation performance of rocket-based combined cycle engine Aerospace Science and Technology 2022 10.1016/j.ast.2022.107617
Yan, D.-K.; Liu, X.; He, G.-Q. & Martinuzzi, R. Ejector mode performance improvement of rocket-based combined cycle engine designed for dual-ramjet mode Aerospace Science and Technology 2022 10.1016/j.ast.2022.107637
Schubert, Y.; Sieber, M.; Oberleithner, K. & Martinuzzi, R. Towards robust data-driven reduced-order modelling for turbulent flows: application to vortex-induced vibrations Theoretical and Computational Fluid Dynamics 2022 10.1007/s00162-022-00609-y
Crane, R. J.; Popinhak, A. R.; Martinuzzi, R. J. & Morton, C. Tomographic piv investigation of vortex shedding topology for a cantilevered circular cylinder Journal of Fluid Mechanics 2022 10.1017/jfm.2021.904
Raibaudo, C. & Martinuzzi, R. J. Unsteady actuation and feedback control of the experimental fluidic pinball using genetic programming Experiments in Fluids 2021 10.1007/s00348-021-03309-1
Huffman, A.; Martinuzzi, R. J. & Sezer, D. An Exploratory Analysis of Wind Patterns of Alberta, Canada Environmental Modeling and Assessment 2021 10.1007/s10666-021-09783-5
Erfan, I.; Abbaspour, M. & Martinuzzi, R. J. Investigation of the influence of low-frequency forcing on the 3-D turbulent wake of a cantilevered triangular prism Journal of Fluid Mechanics 2021
10.1017/jfm.2021.37
Vocke, M.; Bingham, C.; Riches, G.; Martinuzzi, R. & Morton, C. Lagrangian interpolation algorithm for PIV data International Journal of Heat and Fluid Flow 2020
10.1016/j.ijheatfluidflow.2020.108733
Naqavi, I. Z.; Tucker, P. G.; Savory, E. & Martinuzzi, R. J. A numerical study of a rectangular jet along a shear free boundary: Surface jet International Journal of Heat and Fluid Flow 2020
10.1016/j.ijheatfluidflow.2020.108723
Braun, E.; Agrey, K. & Martinuzzi, R. J. End effects of nominally two-dimensional thin flat plates International Journal of Heat and Fluid Flow 2020
10.1016/j.ijheatfluidflow.2020.108719
Ferrari, S.; Hu, Y.; Morton, C. & Martinuzzi, R. J. Visualizing three-dimensional vortex shedding through evolution surface clusters Journal of Visualization 2020
10.1007/s12650-019-00612-2
Raibaudo, C.; Zhong, P.; Noack, B. R. & Martinuzzi, R. J. Machine learning strategies applied to the control of a fluidic pinball Physics of Fluids 2020
10.1063/1.5127202
Hemmati, A.; Wood, D. H. & Martinuzzi, R. J. Wake dynamics and surface pressure variations on two-dimensional normal flat plates AIP Advances 2019
10.1063/1.5079634
Bingham, C.; Raibaudo, C.; Morton, C. & Martinuzzi, R. Suppression of fluctuating lift on a cylinder via evolutionary algorithms: Control with interfering small cylinder Physics of Fluids 2018
10.1063/1.5055016
Kindree, M. G.; Shahroodi, M. & Martinuzzi, R. J. Low-frequency dynamics in the turbulent wake of cantilevered square and circular cylinders protruding a thin laminar boundary layer Experiments in Fluids 2018
10.1007/s00348-018-2641-x
Riches, G.; Martinuzzi, R. & Morton, C. Proper orthogonal decomposition analysis of a circular cylinder undergoing vortex-induced vibrations Physics of Fluids 2018
10.1063/1.5046090
Bingham, C.; Morton, C. & Martinuzzi, R. J. Influence of control cylinder placement on vortex shedding from a circular cylinder Experiments in Fluids 2018
10.1007/s00348-018-2615-z
Graziani, A.; Kerhervé, F.; Martinuzzi, R. J. & Keirsbulck, L. Dynamics of the recirculating areas of a forward-facing step Experiments in Fluids 2018
10.1007/s00348-018-2608-y
Morton, C.; Martinuzzi, R. J.; Kindree, M.; Shahroodi, M. & Saeedi, M. Wake dynamics of a cantilevered circular cylinder of aspect ratio 4 International Journal of Heat and Fluid Flow 2018
10.1016/j.ijheatfluidflow.2018.05.014
Chen, Z. & Martinuzzi, R. J. Shedding of dual structures in the wake of a surface-mounted low aspect ratio cone Physics of Fluids 2018
10.1063/1.5018485
Mohamed, M. A.; Sherry, M.; Plessix, P. D.; Wood, D. H. & Martinuzzi, R. J. Measurements to assess simple RANS model behaviour in stagnating flow International Journal of Heat and Fluid Flow 2018
10.1016/j.ijheatfluidflow.2017.12.010
Hemmati, A.; Wood, D. H. & Martinuzzi, R. J. On simulating the flow past a normal thin flat plate Journal of Wind Engineering and Industrial Aerodynamics 2018
10.1016/j.jweia.2017.12.026
Maleki, M.; Martinuzzi, R. J.; Herzog, W. & Federico, S. Orthotropic hydraulic permeability of arrays of parallel cylinders Physical Review E 2017
10.1103/PhysRevE.96.033112
Kannaiyan, R.; Mahinpey, N.; Kostenko, V. & Martinuzzi, R. J. Enhanced Delignification of Wheat Straw by the Combined Effect of Hydrothermal and Fungal Treatments Chemical Engineering Communications 2017
10.1080/00986445.2017.1322961
Mohebi, M.; Du Plessix, P.; Martinuzzi, R. J. & Wood, D. H. Effect of thickness-to-chord ratio on the wake of two-dimensional rectangular cylinders Physical Review Fluids 2017
10.1103/PhysRevFluids.2.064702
Mohebi, M.; Wood, D. H. & Martinuzzi, R. J. The turbulence structure of the wake of a thin flat plate at post-stall angles of attack Experiments in Fluids 2017
10.1007/s00348-017-2352-8
Erfan, I.; Hajialimohammadi, A.; Chitsaz, I.; Ziabasharhagh, M. & Martinuzzi, R. J. Influence of chamber pressure on CNG jet characteristics of a multi-hole high pressure injector Fuel 2017
10.1016/j.fuel.2017.02.018
Hemmati, A.; Wood, D. H. & Martinuzzi, R. J. Characteristics of distinct flow regimes in the wake of an infinite span normal thin flat plate International Journal of Heat and Fluid Flow 2016
10.1016/j.ijheatfluidflow.2016.09.001
Hemmati, A.; Wood, D. H. & Martinuzzi, R. J. Effect of side-edge vortices and secondary induced flow on the wake of normal thin flat plates International Journal of Heat and Fluid Flow 2016
10.1016/j.ijheatfluidflow.2016.05.012
Hosseini, Z.; Martinuzzi, R. J. & Noack, B. R. Modal energy flow analysis of a highly modulated wake behind a wall-mounted pyramid Journal of Fluid Mechanics 2016
10.1017/jfm.2016.345
Ali, S.; Elliott, K. J.; Savory, E.; Zhang, C.; Martinuzzi, R. J. & Lin, W. E. Investigation of the Performance of Turbulence Models with Respect to High Flow Curvature in Centrifugal Compressors Journal of Fluids Engineering, Transactions of the ASME 2016
10.1115/1.4031779
Hosseini, Z.; Martinuzzi, R. J. & Noack, B. R. Sensor-based estimation of the velocity in the wake of a low-aspect-ratio pyramid Experiments in Fluids 2015
10.1007/s00348-014-1880-8
Kannaiyan, R.; Mahinpey, N.; Kostenko, V. & Martinuzzi, R. J. Nutrient media optimization for simultaneous enhancement of the laccase and peroxidases production by coculture of Dichomitus squalens and Ceriporiopsis subvermispora Biotechnology and Applied Biochemistry 2015
10.1002/bab.1263
El Hassan, M.; Bourgeois, J. & Martinuzzi, R. Boundary layer effect on the vortex shedding of wall-mounted rectangular cylinder Experiments in Fluids 2015
10.1007/s00348-014-1882-6
Dol, S. S.; Salek, M. M. & Martinuzzi, R. J. Energy Redistribution between the Mean and Pulsating Flow Field in a Separated Flow Region Journal of Fluids Engineering, Transactions of the ASME 2014
10.1115/1.4026923
Kannaiyan, R.; Mahinpey, N.; Martinuzzi, R. J. & Kostenko, V. Induction and suppression of Dichomitus squalens and Ceriporiopsis subvermispora peroxidase activity by manganese sulphate in response to carbon and nitrogen sources Canadian Journal of Chemical Engineering 2014
10.1002/cjce.21935
Dol, S. S.; Mehdi Salek, M. & Martinuzzi, R. J. Effects of pulsation to the mean field and vortex development in a backward-facing step flow Journal of Fluids Engineering, Transactions of the ASME 2014
10.1115/1.4025608
Bourgeois, J. A.; Noack, B. R. & Martinuzzi, R. J. Generalized phase average with applications to sensor-based flow estimation of the wall-mounted square cylinder wake Journal of Fluid Mechanics 2013
10.1017/jfm.2013.494
Kostenko, V. & Martinuzzi, R. J. Potential role of microbial biofilms in oil sands tailings management Heavy-Oil and Oil-Sand Petroleum Systems in Alberta and Beyond [AAPG Studies in Geology No. 64] 2013
Available here
Hosseini, Z.; Bourgeois, J. A. & Martinuzzi, R. J. Large-scale structures in dipole and quadrupole wakes of a wall-mounted finite rectangular cylinder Experiments in Fluids 2013
10.1007/s00348-013-1595-2
Assoum, H. H.; Hassan, M. E.; Abed-Meraïm, K.; Martinuzzi, R. & Sakout, A. Experimental analysis of the aero-acoustic coupling in a plane impinging jet on a slotted plate Fluid Dynamics Research 2013
10.1088/0169-5983/45/4/045503
El Hassan, M.; Assoum, H. H.; Martinuzzi, R.; Sobolik, V.; Abed-Meraim, K. & Sakout, A. Experimental investigation of the wall shear stress in a circular impinging jet Physics of Fluids 2013
10.1063/1.4811172
Rosi, G. A.; Martinuzzi, R. J. & Rival, D. E. A conditional analysis of spanwise vortices within the lower atmospheric log layer Journal of Wind Engineering and Industrial Aerodynamics 2013
10.1016/j.jweia.2013.05.007
Sattari, P.; Rival, D. E.; Martinuzzi, R. J. & Tropea, C. Growth and separation of a start-up vortex from a two-dimensional shear layer Physics of Fluids 2012
10.1063/1.4758793
Kannaiyan, R.; Mahinpey, N.; Mani, T.; Martinuzzi, R. J. & Kostenko, V. Enhancement of Dichomitus squalens tolerance to copper and copper-associated laccase activity by carbon and nitrogen sources Biochemical Engineering Journal 2012
10.1016/j.bej.2012.06.007
Araújo, T. B.; Sicot, C.; Borée, J. & Martinuzzi, R. J. Influence of obstacle aspect ratio on tripped cylinder wakes International Journal of Heat and Fluid Flow 2012
10.1016/j.ijheatfluidflow.2012.01.010
Bourgeois, J. A.; Sattari, P. & Martinuzzi, R. J. Coherent vortical and straining structures in the finite wall-mounted square cylinder wake International Journal of Heat and Fluid Flow 2012
10.1016/j.ijheatfluidflow.2012.01.009
Sattari, P.; Bourgeois, J. A. & Martinuzzi, R. J. On the vortex dynamics in the wake of a finite surface-mounted square cylinder Experiments in Fluids 2012
10.1007/s00348-011-1244-6
Salek, M. M.; Sattari, P. & Martinuzzi, R. J. Analysis of fluid flow and wall shear stress patterns inside partially filled agitated culture well plates Annals of Biomedical Engineering 2012
10.1007/s10439-011-0444-9
Hosseini, Z.; Ramirez-Serrano, A. & Martinuzzi, R. Ground/wall effects on a tilting ducted fan International Journal of Micro Air Vehicles 2011
10.1260/1756-8293.3.3.119
Viegas, K. D.; Dol, S. S.; Salek, M. M.; Shepherd, R. D.; Martinuzzi, R. M. & Rinker, K. D. Methicillin resistant Staphylococcus aureus adhesion to human umbilical vein endothelial cells demonstrates wall shear stress dependent behaviour BioMedical Engineering Online 2011
10.1186/1475-925X-10-20
Bourgeois, J. A.; Martinuzzi, R. J.; Savory, E.; Zhang, C. & Roberts, D. A. Assessment of turbulence model predictions for an aero-engine centrifugal compressor Journal of Turbomachinery 2011
10.1115/1.4001136
Bourgeois, J. A.; Sattari, P. & Martinuzzi, R. J. Alternating half-loop shedding in the turbulent wake of a finite surface-mounted square cylinder with a thin boundary layer Physics of Fluids 2011
10.1063/1.3623463
Savory, E.; Martinuzzi, R. J.; Ryval, J.; Li, Z. & Blissitt, M. Evaluation of the thermofluid performance of an automotive engine cooling-fan system motor Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 2011
10.1243/09544070JAUTO1416
Kostenko, V.; Lyczak, J.; Turner, K. & Martinuzzi, R. J. Impact of silver-containing wound dressings on bacterial biofilm viability and susceptibility to antibiotics during prolonged treatment Antimicrobial Agents and Chemotherapy 2010
10.1128/AAC.00825-10
Bordenave, S.; Kostenko, V.; Dutkoski, M.; Grigoryan, A.; Martinuzzi, R. J. & Voordouw, G. Relation between the activity of anaerobic microbial populations in oil sands tailings ponds and the sedimentation of tailings Chemosphere 2010
10.1016/j.chemosphere.2010.07.058
Kostenko, V.; Salek, M. M.; Sattari, P. & Martinuzzi, R. J. Staphylococcus aureus biofilm formation and tolerance to antibiotics in response to oscillatory shear stresses of physiological levels FEMS Immunology and Medical Microbiology 2010
10.1111/j.1574-695X.2010.00694.x
Mehdi Salek, M.; Jones, S. M. & Martinuzzi, R. J. The influence of flow cell geometry related shear stresses on the distribution, structure and susceptibility of Pseudomonas aeruginosa 01 biofilms Biofouling 2009
10.1080/08927010903114603
Jones, S. M.; Dang, T. T. & Martinuzzi, R. Use of quorum sensing antagonists to deter the formation of crystalline Proteus mirabilis biofilms International Journal of Antimicrobial Agents 2009
10.1016/j.ijantimicag.2009.06.011
Goulet, G. C.; Coombe, D.; Martinuzzi, R. J. & Zernicke, R. F. Poroelastic evaluation of fluid movement through the lacunocanalicular system Annals of Biomedical Engineering 2009
10.1007/s10439-009-9706-1
Tan, Z.; Zhang, H.; Abedi, J.; Yu, Z. & Martinuzzi, R. Development of a new high-efficiency simple structure cyclone Canadian Journal of Chemical Engineering 2009
10.1002/cjce.20166
Abu-Ramadan, E.; Ghafouri, B.; Savory, E.; Zhang, C. & Martinuzzi, R. J. Prediction of the low-reynolds number flows around the airfoil and bluff body components of an automotive cooling fan module SAE Technical Papers 2009
10.4271/2009-01-1531
Hunt, A. G.; Savory, E.; Gifford, N. L. & Martinuzzi, R. J. Downstream blockage corrections of automotive cooling fan module performance SAE Technical Papers 2009
10.4271/2009-01-0175
Martinuzzi, R. J. Dual vortex structure shedding from low aspect ratio, surface-mounted pyramids Journal of Turbulence 2008
10.1080/14685240802272117
Yerly, J.; Hu, Y. & Martinuzzi, R. J. Biofilm structure differentiation based on multi-resolution analysis Biofouling 2008
10.1080/08927010802209892
Goulet, G. C.; Hamilton, N.; Cooper, D.; Coombe, D.; Tran, D.; Martinuzzi, R. & Zernicke, R. F. Influence of vascular porosity on fluid flow and nutrient transport in loaded cortical bone Journal of Biomechanics 2008
10.1016/j.jbiomech.2008.04.022
AbuOmar, M. M. & Martinuzzi, R. J. Vortical structures around a surface-mounted pyramid in a thin boundary layer Journal of Wind Engineering and Industrial Aerodynamics 2008
10.1016/j.jweia.2007.06.009
Dol, S. S.; Kopp, G. A. & Martinuzzi, R. J. The suppression of periodic vortex shedding from a rotating circular cylinder Journal of Wind Engineering and Industrial Aerodynamics 2008
10.1016/j.jweia.2007.06.038
Csiba, A. L. & Martinuzzi, Robert. J. Investigation of bluff body asymmetry on the properties of vortex shedding Journal of Wind Engineering and Industrial Aerodynamics 2008
10.1016/j.jweia.2007.06.037
Gholamreza-Kashi, S.; Martinuzzi, R. J. & Baddour, R. E. Comparison of far-field turbulent structure of a rectangular surface jet to three-dimensional free and wall jets Journal of Engineering Mechanics 2008
10.1061/(ASCE)0733-9399(2008)134:3(224)
Kostenko, V.; Ceri, H. & Martinuzzi, R. J. Increased tolerance of Staphylococcus aureus to vancomycin in viscous media FEMS Immunology and Medical Microbiology 2007
10.1111/j.1574-695X.2007.00300.x
Martinuzzi, R.; AbuOmar, M. & Savory, E. Scaling of the wall pressure field around surface-mounted pyramids and other bluff bodies Journal of Fluids Engineering, Transactions of the ASME 2007
10.1115/1.2754325
Yerly, J.; Hu, Y.; Jones, S. M. & Martinuzzi, R. J. A two-step procedure for automatic and accurate segmentation of volumetric CLSM biofilm images Journal of Microbiological Methods 2007
10.1016/j.mimet.2007.05.022
Baran, O.; Drozd, J. J.; Martinuzzi, R. J. & Poole, P. H. Granular circulation in a cylindrical pan: Simulations of reversing radial and tangential flows Physical Review E - Statistical, Nonlinear, and Soft Matter Physics 2007
10.1103/PhysRevE.76.021305
Harrison, J. J.; Ceri, H.; Yerly, J.; Rabiei, M.; Hu, Y.; Martinuzzi, R. & Turner, R. J. Metal ions may suppress or enhance cellular differentiation in Candida albicans and Candida tropicalis biofilms Applied and Environmental Microbiology 2007
10.1128/AEM.02711-06
Shah, U.; Zhang, C.; Zhu, J.; Wang, F. & Martinuzzi, R. Validation of a numerical model for the simulation of an electrostatic powder coating process International Journal of Multiphase Flow 2007
10.1016/j.ijmultiphaseflow.2006.12.001
Haneef-Mian, M.; Yanful, E. K. & Martinuzzi, R. Measuring the onset of mine tailings erosion Canadian Geotechnical Journal 2007
10.1139/T06-116
Jones, S. M.; Yerly, J.; Hu, Y.; Ceri, H. & Martinuzzi, R. Structure of Proteus mirabilis biofilms grown in artificial urine and standard laboratory media FEMS Microbiology Letters 2007
10.1111/j.1574-6968.2006.00587.x
Gholamreza-Kashi, S.; Martinuzzi, R. J. & Baddour, R. E. Mean flow field of a nonbuoyant rectangular surface jet Journal of Hydraulic Engineering 2007
10.1061/(ASCE)0733-9429(2007)133:2(234)
Abu-Ramadan, E.; Dybenko, J.; Savory, E.; Hunt, A. G. & Martinuzzi, R. J. Stator and support arm aerodynamic performance for automotive engine cooling fans with realistic inlet conditions SAE Technical Papers 2007
10.4271/2007-01-0769
Gifford, N. L.; Savory, E. & Martinuzzi, R. J. Experimental study of automotive cooling fan aerodynamics SAE Technical Papers 2007
10.4271/2007-01-1525
Harrison, J. J.; Ceri, H.; Yerly, J.; Stremick, C. A.; Hu, Y.; Martinuzzi, R. & Turner, R. J. The use of microscopy and three-dimensional visualization to evaluate the structure of microbial biofilms cultivated in the Calgary biofilm device Biological Procedures Online 2006
10.1251/bpo127
Baddour, R. E.; Zaghloul, A. & Martinuzzi, R. Entrainment properties of plane surface-jets in shallow current Journal of Hydraulic Engineering 2006
10.1061/(ASCE)0733-9429(2006)132:4(363)
Hunt, A. G.; Savory, E. & Martinuzzi, R. J. Stator performance for automotive cooling fans with unsteady inlet conditions SAE Technical Papers 2006
10.4271/2006-01-1038
Li, Z.; Savory, E.; Ryval, J.; Martinuzzi, R. J. & Blissitt, M. Effect of fan hub configuration on the cooling airflow through electric motors in engine cooling fan systems SAE Technical Papers 2006
10.4271/2006-01-1037
Wang, F.; Martinuzzi, R. & Zhu, J. Experimental study of particle trajectory in electrostatics powder coating process Powder Technology 2005
10.1016/j.powtec.2004.12.001
Martinuzzi, R. J. & Havel, B. Vortex shedding from two surface-mounted cubes in tandem International Journal of Heat and Fluid Flow 2004
10.1016/j.ijheatfluidflow.2004.02.003
Fohanno, S. & Martinuzzi, R. J. A phase-averaged analysis of droplet dispersion in the wake of a square cylinder in a uniform stream Journal of Fluids Engineering, Transactions of the ASME 2004
10.1115/1.1637637
Martinuzzi, R. J.; Bailey, S. C. C. & Kopp, G. A. Influence of wall proximity on vortex shedding from a square cylinder Experiments in Fluids 2003
10.1007/s00348-003-0594-0
Zhou, H.; Martinuzzi, R. J.; Khayat, R. E.; Straatman, A. G. & Abu-Ramadan, E. Influence of wall shape on vortex formation in modulated channel flow Physics of Fluids 2003
10.1063/1.1603747
Straatman, A. G. & Martinuzzi, R. J. An examination of the effect of boundary layer thickness on vortex shedding from a square cylinder near a wall Journal of Wind Engineering and Industrial Aerodynamics 2003
10.1016/S0167-6105(03)00050-3
Martinuzzi, R. J. & AbuOmar, M. Study of the flow around surface-mounted pyramids Experiments in Fluids 2003
10.1007/s00348-002-0573-x
Straatman, A. G. & Martinuzzi, R. J. A comparison of second-moment closure models in the prediction of vortex shedding from a square cylinder near a wall Journal of Fluids Engineering, Transactions of the ASME 2002
10.1115/1.1490127
Yang, Y.; Straatman, A. G.; Martinuzzi, R. J. & Yanful, E. K. A study of laminar flow in low aspect ratio lid-driven cavities Canadian Journal of Civil Engineering 2002
10.1139/l02-027
Zhou, H.; Khayat, R. E.; Martinuzzi, R. J. & Straatman, A. G. On the validity of the perturbation approach for the flow inside weakly modulated channels International Journal for Numerical Methods in Fluids 2002
10.1002/fld.355
Bailey, S. C. C.; Martinuzzi, R. J. & Kopp, G. A. The effects of wall proximity on vortex shedding from a square cylinder: Three-dimensional effects Physics of Fluids 2002
10.1063/1.1514972
Bailey, S. C. C.; Kopp, G. A. & Martinuzzi, R. J. Vortex shedding from a square cylinder near a wall Journal of Turbulence 2002
10.1088/1468-5248/3/1/003
Maucci, E.; Briens, C. L.; Martinuzzi, R. J. & Wild, G. Improvement of liquid-solid and gas-liquid mass transfer in multiphase pulsing systems Chemical Engineering and Processing 2002
10.1016/S0255-2701(00)00157-4
Havel, B.; Hangan, H. & Martinuzzi, R. Buffeting for 2D and 3D sharp-edged bluff bodies Journal of Wind Engineering and Industrial Aerodynamics 2001
10.1016/S0167-6105(01)00152-0
Maucci, E.; Briens, C. L.; Martinuzzi, R. J. & Wild, G. Modeling of transient particle-liquid mass transfer in liquid and liquid-solid systems Chemical Engineering Science 2001
10.1016/S0009-2509(00)00461-9
Hangan, H.; Kopp, G. A.; Vernet, A. & Martinuzzi, R. A wavelet pattern recognition technique for identifying flow structures in cylinder generated wakes Journal of Wind Engineering and Industrial Aerodynamics 2001
10.1016/S0167-6105(01)00095-2
Maucci, E.; Martinuzzi, R. J.; Briens, C. L. & Wild, G. Modelling of transient mass transfer in liquid and liquid-solid pulsating systems: Applications and extension to heat transfer Canadian Journal of Chemical Engineering 2001
10.1002/cjce.5450790305
Martinuzzi, R. J. & Havel, B. Turbulent flow around two interfering surface-mounted cubic obstacles in tandem arrangement Journal of Fluids Engineering, Transactions of the ASME 2000
10.1115/1.483222
Maucci, E.; Briens, C. L.; Martinuzzi, R. J. & Wild, G. Detection and characterization of piston flow regime in three-phase fluidized beds Powder Technology 1999
10.1016/S0032-5910(99)00035-2
Fan, L.-S.; Maucci, E.; Briens, C. L.; Martinuzzi, R. J. & Wild, G. Moving packed bed phenomenon in three-phase fluidization (multiple letters) Powder Technology 1999
10.1016/S0032-5910(99)00036-4
Meinders, E. R.; Hanjalic, K. & Martinuzzi, R. J. Experimental study of the local convection heat transfer from a wall-mounted cube in turbulent channel flow Journal of Heat Transfer 1999
10.1115/1.2826017
Martinuzzi, R.; Zaghloul, A. M.; Al-Qaraguli, W. & Baddour, R. E. Turbulence structure of plane surface-jets in a weak coflowing stream for different initial wake conditions Journal of Fluids Engineering, Transactions of the ASME 1998
10.1115/1.2819666
Masson, C.; Martinuzzi, R.; Mirshams, M. & Paraschivoiu, I. Natural transition in transonic flows using an efficient temporal/spatial formulation Journal of Aircraft 1996
10.2514/3.47038
Hussein, H. J. & Martinuzzi, R. J. Energy balance for turbulent flow around a surface mounted cube placed in a channel Physics of Fluids 1996
10.1063/1.868860
Domnick, J. & Martinuzzi, R. A cheap and effective alternative for particle seeding fluid in LDA-applications Experiments in Fluids 1994
10.1007/BF00206551
Martinuzzi, R. & Tropea, C. The flow around surface-mounted, prismatic obstacles placed in a fully developed channel flow: (Data bank contribution) Journal of Fluids Engineering, Transactions of the ASME 1993
10.1115/1.2910118
Liu, W. Q.; Paraschivoiu, I. & Martinuzzi, R. Calculation of dynamic stall on SANDIA 34-M VAWT using an indicial model Wind Engineering 1992
Available here
Pollard, A. & Martinuzzi, R. Comparative study of turbulence models in predicting turbulent pipe flow. II - Reynolds stress and k-epsilon models AIAA Journal 1989
10.2514/3.10325
Pollard, A. & Martinuzzi, R. A comparative study of eleven models of turbulence.   1987
Available here
Manohar, Kevin H.; Morton, Chris & Ziad\'e, Paul Sparse sensor-based cylinder flow estimation using artificial neural networks Phys. Rev. Fluids 2022
10.1103/PhysRevFluids.7.024707
Kapulla, R.; Manohar, K. H.; Paranjape, S. & Paladino, D. Self-similarity for statistical properties in low-order representations of a large-scale turbulent round jet based on the proper orthogonal decomposition Experimental Thermal and Fluid Science 2021
10.1016/j.expthermflusci.2020.110320
Augmenting PIV temporal resolution via semi-Lagrangian estimation of velocity fluctuations

Didn't find what you're looking for?

See our conference contributions here:

Conference Contributions