University of Calgary : Geomatics Engineering ENGO

Geomatics Engineering ENGO

ENGO 601 615 617 620 623 625 629 633 637 638 639 642 645 658 667 675 681 691 693 694 697 698 699

Instruction offered by members of the Department of Geomatics Engineering in the Schulich School of Engineering.

Graduate Courses

Following are the graduate courses normally offered in the Department. Additional courses are also offered by visiting international lecturers. Please refer to the Department website (geomatics.ucalgary.ca) for current course listings.

Geomatics Engineering 601

Graduate Project

Individual project in the student's area of specialization under the guidance of the student's supervisor. A written proposal, one or more written progress reports, and a final written report are required. An oral presentation is required upon completion of the course.
Course Hours: 3 units; H(0-4)
Notes: Open only to students in the course-based MEng.

Geomatics Engineering 615

Advanced Physical Geodesy

Potential theory and geodetic boundary value problems (GBVPs). Solution approaches to the Molodensky problem. Least-squares collocation (LSC). Hilbert spaces with kernel functions. Variational principles, improperly posed problems and regularization. The altimetry-gravimetry and overdetermined GBVPs. Solution of GBVPs by integral techniques, fast Fourier transforms and LSC. Use of heterogeneous data sets and noise propagation. Applications to gravity prediction, geoid determination, deflection estimation, satellite altimetry and airborne gravimetry and gradiometry. Current research activities.
Course Hours: 3 units; H(3-0)

Geomatics Engineering 617

Participatory Geographic Information Systems (PGIS)

Introduction of methods to engage in effective dialogue and advocacy through the adoption of Participatory Geographic Information Systems (PGIS). Approaches learned to safeguard culturally sensitive information from external misuse and exploitation; methods to ensure traditional custodians maintain control of their spatial information; methods for producing, georeferencing and visualizing (indigenous) spatial knowledge that promote peer-to-peer dialogue, and their aspirations and concerns with higher-level authorities. The course will be a workshop forward that incorporates readings and various group exercises to provide students with a road make to undertaking PGIS.
Course Hours: 3 units; H(3-0)

Geomatics Engineering 620

Estimation for Navigation

Overview of estimation fundamentals including stochastic processes, covariance matrices, auto-correlation functions, power spectral densities, and error propagation. Review of least-squares estimation, summation of normals and sequential least-squares formulations, and role of measurement geometry in least-squares position estimation. Constraints and implementations. Concept of Kalman filtering; relationship between Kalman filtering and least-squares; linear, linearized and extended Kalman filter formulations; system model formulation; process noise model determination; measurement models, and effect of time-correlated measurements and possible remedies. Numerical stability issues in estimation and possible solutions. Statistical reliability in least-squares and Kalman filtering and related RAIM concepts. Introduction to other estimation techniques including unscented Kalman filters and particle filters. Application of above topics to relevant navigation estimation problems.
Course Hours: 3 units; H(2-2)

Geomatics Engineering 623

Inertial Surveying and INS/GPS Integration

Inertial sensors and their application in inertial navigation, existing inertial systems, new developments in strapdown technology. Practical aspects of inertial positioning definition of an operational inertial frame, inertial error models. Effect of inertial sensor errors on the derived navigation parameters, performance characteristics of inertial sensors, calibration of inertial sensors. Mechanization equations in different co-ordinate frames, step by step computation of the navigation parameters from the inertial sensor data introduction to Kalman filtering for optimal error estimation, modelling INS errors by linear state equations, practical issues for the implementation of update measurements (ZUPT, CUPT, Integrated systems), current research activities.
Course Hours: 3 units; H(3-0)

Geomatics Engineering 625

Advanced GNSS Theory and Applications

Overview of space positioning and navigation systems; concepts and general description. Global Navigation Satellite System signal description. Receiver and antenna characteristics and capabilities; signal measurements indoor; GNSS error sources and biases; atmospheric delays, signal reflection and countermeasures. Mathematical models for static point and relative positioning. Kinematic single point and differential post mission and real time positioning, navigation and location. Augmentation methods. Land, marine, airborne and indoor applications. Case studies.
Course Hours: 3 units; H(3-2)

Geomatics Engineering 629

Advanced Estimation Methods and Analysis

Introduction of different estimation criteria, error sources in estimation, modelling and testing requirements. Advanced least squares method, estimation equations and analysis. Random processes, dynamic models, Kalman filter equations and analysis. Implementation aspects. Concept of signal, least squares collocation equations and applications. Robust estimation principle and robustified least squares and Kalman filter. Data modelling issue in estimation, functional and stochastic model development for least squares and Kalman filter. Error analysis, conventional and robust statistical testing methods and analysis. Applications to geomatics engineering problems in geodesy, positioning and navigation, photogrammetry, etc.
Course Hours: 3 units; H(3-0)

Geomatics Engineering 633

Atmospheric Effects on Satellite Navigation Systems

Theoretical and observed aspects of radio wave propagation in the ionosphere and troposphere, with an emphasis on L-band (GPS) signals. Fundamentals of absorption, attenuation, depolarization, and defraction will be covered, in addition to characteristics and physical properties of the propagation medium and atmospheric constituents. The impact of such effects, and methods of mitigation, will be interpreted with respect to satellite navigation applications.
Course Hours: 3 units; H(3-0)

Geomatics Engineering 637

Earth Observation for the Environment

Earth Observation for the Environment An introduction to environmental earth observation systems in particular to satellite platforms. Topics include: discussion of physical principles, including governing equations; imaging system geometries; radiometric corrections, including calibration and atmospheric correction; spatial filtering for noise removal and information extraction; geometric corrections, including rectification and registration; fusion of multi-dimensional datasets (i.e., multi-spectral, multi-temporal, multi-resolution, and point-source ground data); and application of satellite images in addressing selected environmental issues.
Course Hours: 3 units; H(3-0)
Antirequisite(s): Credit for Geomatics Engineering 637 and any of Geomatics Engineering 619.04, Environmental Engineering 637 or 619.05 will not be allowed.
Also known as: (Environmental Engineering 637)

Geomatics Engineering 638

GNSS Receiver Design

Global Navigation Satellite System signal structure, overview of receiver architecture, measurements, antenna design, receiver front-end, reference oscillator, sampling and quantization, phase lock loops, frequency lock loops and delay lock loops, tracking loop design and errors, signal acquisition and detection, interference effects.
Course Hours: 3 units; H(2.5-1)

Geomatics Engineering 639

Advanced Topics in Digital Image Processing

Review of basic digital imaging; advanced topics in multispectral or hyperspectral analysis, multiresolution analysis, image segmentation, image transform, data fusion, pattern recognition or feature matching; current research applications especially in Geomatics.
Course Hours: 3 units; H(3-0)

Geomatics Engineering 642

Optical Imaging Metrology

Optical imaging methods for precise close-range measurement. Photogrammetric techniques with emphasis on the bundle adjustment. Photogrammetric datum definition, network design and quality measures. Principles of laser rangefinding and laser scanning. Imaging distortions, sensor modelling and system self-calibration for a variety of imaging sensors including digital cameras, panoramic cameras, 3D laser scanners and 3D range cameras. Automated point cloud processing methods; registration, modelling and segmentation. Selected case studies.
Course Hours: 3 units; H(3-0)

Geomatics Engineering 645

Spatial Databases and Data Mining

Comprehensive overview of spatial database management systems and issues related to spatial data mining. The topics that will be covered include: overview of spatial databases, spatial concepts and data models, spatial query languages, spatial storage and indexing, spatial networks, spatial data mining, and trends in spatial databases.
Course Hours: 3 units; H(3-0)

Geomatics Engineering 658

Geocomputation

Overview of the fundamental concepts, approaches, techniques, and applications in the field of Geocomputation. Topics being discussed include Geocomputation, Computational intelligence, Complex Systems theory, Cellular automata modelling, Multi-agent system modelling, Calibration and validation of dynamic models, Scale, Artificial neural network, Data mining and knowledge discovery, Geovisualization, and Post-normal science. Individual projects involving the application of Geocomputational techniques and models are conducted.

Course Hours: 3 units; H(3-0)

Geomatics Engineering 667

Advanced Topics in Photogrammetry

Overview of aerial triangulation procedures (strip triangulation, block adjustment of independent models, bundle block adjustment, automatic aerial triangulation, direct versus indirect orientation). Mapping from space (modelling the perspective geometry of line cameras, epipolar geometry for line cameras). Multi-sensor aerial triangulation (integrating aerial and satellite imagery with navigation data). Photogrammetric products (Digital Elevation Models, ortho-photos). The role of features in photogrammetric operations (utilizing road network captured by terrestrial navigation systems in various orientation procedures).
Course Hours: 3 units; H(3-0)

Geomatics Engineering 675

Spatial Statistics

Spatial phenomena and spatial processes. Spatial data analysis and the importance of spatial data in scientific research. Methods will range from exploratory spatial data analysis through to recent developments such as nonparametric semivariogram modelling, generalized linear mixed models, estimation and modelling of nonstationary covariances, and spatio-temporal processes.
Course Hours: 3 units; H(3-0)

Geomatics Engineering 681

Advanced Global Geophysics and Geodynamics

Elasticity, figure of the Earth, Earth structure and seismology, gravity and its temporal variations, isostasy, tides, Earth rotation and orientation, time, plate flexure, glacial rebound, continental drift, geodetic observation methods for geodynamics.
Course Hours: 3 units; H(3-0)
Also known as: (Geophysics 681)

Geomatics Engineering 691

Polarimetric Synthetic Aperture Radar

Introduction to image formation with polarimetric synthetic aperture radar (POLSAR), theory of polarized electromagnetic waves, polarimetric scattering from targets, POLSAR data models, speckle filtering, data decomposition, classification, and segmentation
Course Hours: 3 units; H(3-0)
MAY BE REPEATED FOR CREDIT

Geomatics Engineering 693

Cadastral Information Systems

Cadastral Systems, cadastral data, land registration, data structures and schemas for land administration information, ISO standards, evolutionary models, land tools, effectiveness metrics.
Course Hours: 3 units; H(3-0)

Geomatics Engineering 694

Advanced Topics in Sensor Web and Internet of Things

Overview of the sensor web architecture and algorithms, with a focus on Internet of Things. The topics that will be covered include: sensor web data management, sensor web search and discovery, sensor web server design and implementation, interoperability issues, sensor-based analytics and visualization, introduction to sensor networks, and trends in sensor web and Internet of Things.
Course Hours: 3 units; H(3-0)

Geomatics Engineering 697

Directed Studies

Individual project study conducted under the guidance of a faculty member and intended to familiarize the student with the literature and techniques that are required for their research program, but are not available in regular courses.
Course Hours: 3 units; H(3-0)
Prerequisite(s): Consent of the Department Head or Associate Head Graduate Studies.
MAY BE REPEATED FOR CREDIT

Geomatics Engineering 698

Professional Development Seminar

This professional development seminar aims at providing relevant skills to be a successful graduate student and to make a smooth transition to a rewarding professional career. In addition to efficient communication skills, this course will place an emphasis on research methodologies such as formulating research problems, preparing a scholarship application, writing a paper for publication, and defending a thesis. How to prepare for a successful interview in industry or academia and the required process for becoming a professional engineer will also be discussed.
Course Hours: 3 units; H(3S-0)
NOT INCLUDED IN GPA

Geomatics Engineering 699

Special Studies

Focus on advanced studies in specialized topics that are not offered in the regular graduate curriculum of the Department.
Course Hours: 3 units; H(3-0)
MAY BE REPEATED FOR CREDIT

UofC