University of Calgary : Chemistry CHEM

Chemistry CHEM

CHEM 201 203 209 211 213 301 311 315 321 351 353 355 357 371 373 379 402 409 417 423 425 431 433 453 471 502 515 521 531 533 535 541 551 553 555 559 571 573 575 579 599 601 603 613 615 617 619 621 623 627 629 641 651 653 655 657 659 669 681 689 701

For more information about these courses see the Department of Chemistry: ucalgary.ca/chem/.

Students interested in taking Chemistry courses are urged to read the advice in the Faculty of Science Program section of this Calendar. Students taking Chemistry courses which have a laboratory component are required to provide evidence that they have successfully completed the Chemical Laboratory Safety Course for Undergraduates prior to the first laboratory class. Students who have not completed this course at some time during their undergraduate program will not be allowed into the laboratory until they do so. Information about this course is available from the Chemistry Undergraduate Office (SA 229), email address: chem.undergrad@ucalgary.ca, or at chem/undergraduate/current_students/academics.

Junior Courses

Chemistry 201

General Chemistry: Structure and Bonding

An introduction to university chemistry from theoretical and practical perspectives, that focuses on an exploration of the fundamental links between electronic structure, chemical bonding, molecular structure and the interactions of molecules using inorganic and organic examples.
Course Hours: 3 units; (3-.75T-3/2)
Prerequisite(s): Chemistry 30 (or Continuing Education - Chemistry 2) and one of Mathematics 30-1 or Mathematics 2 (offered by Continuing Education).
Antirequisite(s): Credit for Chemistry 201 and any of 209, 211 or 301 will not be allowed.

Chemistry 203

General Chemistry: Change and Equilibrium

An introduction to university chemistry from theoretical and practical perspectives that focuses on an exploration of the fundamental links between kinetics, equilibria and thermodynamics and explores acidity/basicity and redox behaviour using inorganic and organic examples.
Course Hours: 3 units; (3-.75T-3/2)
Prerequisite(s): Chemistry 30 (or Continuing Education - Chemistry 2) and one of Mathematics 30-1 or Mathematics 2 (offered by Continuing Education).
Antirequisite(s): Credit for Chemistry 203 and any of 209, 213 or 301 will not be allowed.

Chemistry 209

General Chemistry for Engineers

Basic chemical concepts. Atomic and molecular structure. Chemical bonding. Chemical kinetics and equilibria. Acid-base and solubility equilibria. Oxidation-reduction phenomena and electrochemistry. The chemistry of water. The chemistry of energy sources. Basic environmental issues.
Course Hours: 3 units; (3-1T-3/2)
Prerequisite(s): Chemistry 30 (or Continuing Education - Chemistry 2) and one of Mathematics 30-1 or Mathematics 2 (offered by Continuing Education).
Antirequisite(s): Credit for Chemistry 209 and any of 201, 203, 211, 213 and 301 will not be allowed.

Chemistry 211

Foundations of Chemistry: Structure and Bonding

Same core topics as Chemistry 201 but taught with a greater emphasis on critical thinking, scientific observation and problem solving and the application of chemistry to topics such as drug design and environmental issues.
Course Hours: 3 units; (3-3)
Prerequisite(s): A grade of 80 per cent or higher in Chemistry 30 (or a grade of "B+" or higher in Continuing Education - Chemistry 2) and one of Mathematics 30-1 or Mathematics 2 (offered by Continuing Education).
Antirequisite(s): Credit for Chemistry 211 and any of 201, 209 or 301 will not be allowed.

Chemistry 213

Foundations of Chemistry: Change and Equilibrium

Same core topics as Chemistry 203 but taught with a greater emphasis on critical thinking, scientific observation and problem solving and the application of chemistry to topics such as materials, explosives and medicine.
Course Hours: 3 units; (3-3)
Prerequisite(s): Chemistry 201 or 211.
Antirequisite(s): Credit for Chemistry 213 and any of 203, 209 or 301 will not be allowed.

Senior Courses

Note: In all senior courses in Chemistry with a laboratory component, a charge will be levied for excessive breakage of glassware or equipment.

Chemistry 301

The Chemical World

The focus is on developing a general awareness and appreciation of the chemistry all around us; where chemical principles are surveyed in a variety of current and everyday contexts.
Course Hours: 3 units; (3-0)
Antirequisite(s): Credit for Chemistry 301 and any of 201, 203, 209, 211 or 213 will not be allowed. Registration in this course is not permitted for Honours, Majors or Minors in Chemistry programs or Environmental Science (Chemistry Concentration) or Natural Sciences (Chemistry Concentration).
Notes: This course is not in the field of Chemistry. May not be used for credit by Honours, Majors or Minors in Chemistry programs or Environmental Science (Chemistry Concentration) or Natural Sciences (Chemistry Concentration).

Chemistry 311

Analytical Chemistry: Quantitative Analysis

Lectures: Principles and practice of precision measurement in chemistry. Statistical treatment of data. Acid-base and oxidation-reduction equilibria. Complexometric analysis. Laboratory: Quantitative analysis of organic and inorganic materials.
Course Hours: 3 units; (3-4)
Prerequisite(s): Chemistry 201 or 211; and 203 or 213; and one of Mathematics 249, 265 or 275.

Chemistry 315

Analytical Chemistry: Introductory Instrumental Analysis

Lectures: Principles and practice of instrumental measurements for the quantitative determination of substances. Spectroscopic analysis. Analytical separations: liquid-liquid extraction, solid phase extraction, chromatography. Electrochemical methods: potentiometry, voltammetry, coulometry. Automated methods of analysis. Laboratory: Quantitative analysis of organic and inorganic materials using simple instrumental techniques.
Course Hours: 3 units; (3-4)
Prerequisite(s): Chemistry 311.

Chemistry 321

Environmental Chemistry

A survey course of major aspects of environmental chemistry including the natural chemical cycles in the biosphere, geosphere, hydrosphere and atmosphere and the consequences of anthropogenic disturbances to these cycles. Topics discussed will include: Aquatic Chemistry and water pollution. Atmospheric Chemistry and its alteration. Soil Chemistry and the fate of pollutants. Hazardous waste. Toxicological Chemistry.
Course Hours: 3 units; (3-0)
Prerequisite(s): One of Chemistry 203, 209 or 213.

Chemistry 351

Organic Chemistry I

An introduction to Organic Chemistry from a mechanistic perspective. Structure, bonding, and function, e.g. physical properties and reactivity. Stereochemistry; kinetics and thermodynamics. Spectroscopy (nuclear magnetic resonance, infrared, ultra-violet/visible, and mass spectrometric techniques). Substitution and elimination reactions of saturated functional groups - the chemistry of alkanes, alkyl halides, alcohols and their derivatives. Laboratory: Practical techniques.
Course Hours: 3 units; (3-1T-3)
Prerequisite(s): Chemistry 201 or 211; and 203 or 213.
Antirequisite(s): Credit for Chemistry 351 and 357 will not be allowed.

Chemistry 353

Organic Chemistry II

The concept and implications of aromaticity. The reactions of unsaturated functional groups via substitution, elimination and addition mechanisms - the chemistry of alkenes, alkynes, aromatics, aldehydes, ketones and carboxylic acids and their derivatives. Laboratory: Characteristic functional group reactivity, synthesis, and qualitative organic analysis.
Course Hours: 3 units; (3-1T-3)
Prerequisite(s): Chemistry 351.
Antirequisite(s): Credit for Chemistry 353 and either 355 or 357 will not be allowed.

Chemistry 355

Organic Chemistry II (for Chemists)

Mechanisms and synthetic applications of the reactions of alkenes, alkynes, aromatics, carbonyl compounds, carboxylic acids and derivatives, and conjugated systems such as 1, 3-dienes and enones. The concept of aromaticity and its effect on chemical behaviour. Laboratory: Emphasis on organic synthesis and the methods of qualitative organic analysis.
Course Hours: 3 units; (3-1T-3)
Prerequisite(s): Chemistry 201 or 211; and 203 or 213; and 351 and admission to the Chemistry major, Applied Chemistry major or Chemical Physics major.
Antirequisite(s): Credit for Chemistry 355 and either 353 or 357 will not be allowed.

Chemistry 357

Industrial Organic Chemistry for Engineers

The hybridization of the carbon atom and covalent bonding. Typical reactions of alkanes, alkenes, alkynes and industrial applications. Substitution; halogenation, nitration and oxidation of aromatic hydrocarbons; polymerization and industrial applications. Functional groups and their reactions; oxidation, reduction, addition and elimination reactions, and industrial applications.
Course Hours: 3 units; (3-1T)
Prerequisite(s): Chemistry 209, or 201 or 211; and 203 or 213.
Antirequisite(s): Credit for Chemistry 357 and any of 351, 353 or 355 will not be allowed.

Chemistry 371

Physical Chemistry: Thermodynamics Chemistry

Lectures: A study of the states of matter. The basic laws of thermodynamics and their applications. Development of the concept of chemical potential. Changes of state and phase diagrams of pure substances and mixtures. Equilibrium electrochemistry. Laboratory: Experimental measurements, interpretations, and calculations relating to the topics discussed in lectures.
Course Hours: 3 units; (3-1T-3)
Prerequisite(s): Chemistry 201 or 211; and 203 or 213; Physics 223 or admission to a Major program offered by the Department of Physics and Astronomy and 6 units of Physics; and Mathematics 267 or 277.
Antirequisite(s): Credit for Chemistry 371 and any of Physics 347, 349, or 447 will not be allowed.

Chemistry 373

Physical Chemistry: Quantum Chemistry

Lectures: Elementary quantum mechanical treatment of the energy levels of atoms and molecules. Atomic spectra. Symmetry elements, operations, and point groups. Laboratory: Experimental measurements, interpretations, and calculations relating to the topics discussed in lectures.
Course Hours: 3 units; (3-1T-3)
Prerequisite(s): Chemistry 201 or 211; and 203 or 213; Physics 223 or 355; Mathematics 267 or 277.

Chemistry 379

Materials Chemistry for Engineers

An introduction to materials chemistry with industrial applications. Theories of chemical bonding and the relationship between chemical structure and observable properties. Chemical and physical properties of mixtures and interfaces. Structure and applications of polymers and soft materials.
Course Hours: 3 units; (3-1T)
Prerequisite(s): Chemistry 209, or 201 or 211; and 203 or 213.

Chemistry 402

Introduction to Research in Chemistry

A chemistry-based research project under the supervision of an academic staff member.

402.01 – Introduction to Research in Chemistry I
402.02 – Introduction to Research in Chemistry II

Course Hours: 3 units; (0-9)
Prerequisite(s): Chemistry 201 or 211; and 203 or 213; and consent of the Department.

Chemistry 409

Applied Chemistry and Chemical Pathways for Engineers

Analysis of industrial chemical processes based on reaction pathways to infer system performance including co-product formation and the role of catalysts. Examples from oil, gas, coal and petrochemical processing.
Course Hours: 3 units; (3-0)
Prerequisite(s): Chemistry 209 and 357.

Chemistry 417

Modern Chromatographic Analysis

Fundamental concepts and methods of chromatographic separation science: Partition theory, sample preparation, chromatographic theory, gas and liquid chromatography, principles of detection. Emerging concepts such as micro-fluidic separation platforms, column technology and novel mobile phases.
Course Hours: 3 units; (3-0)
Prerequisite(s): Chemistry 311 and 315.

Chemistry 423

Green Chemistry: Principles and Techniques

Green Chemistry focuses on the science and techniques that chemists and chemical and process engineers use to generate less waste, and to develop products and processes that are more atom- and energy-efficient, environmentally sensitive, and cost-effective. A look at the principles behind green chemistry, some techniques and processes used in achieving atom- and energy-efficiency, and waste reduction.
Course Hours: 3 units; (3-0)
Prerequisite(s): Chemistry 333 or 433; and one of 353 or 355; or Chemistry 357 and 409.

Chemistry 425

Industrial Chemistry

Electrochemical processes and the applications of some of their products. Unit operations and reactor types in the chemical industry. Petroleum refining including heavy oil and bitumen. Industrial organic synthesis including monomers for subsequent polymerization. Design of specialized polymers.
Course Hours: 3 units; (3-0)
Prerequisite(s): Chemistry 353 or 355.

Chemistry 431

Inorganic Chemistry: Main Group Elements

Lectures: The structure of many-electron atoms. Bonding, stereochemistry and symmetry in inorganic compounds. Solid-state science and aspects of inorganic solution chemistry. The chemistry of the main group elements. Laboratory: Applications of chemical principles to inorganic synthetic and qualitative analytical problems.
Course Hours: 3 units; (3-3)
Prerequisite(s): Chemistry 201 or 211; and 203 or 213;, and 351.
Also known as: (formerly Chemistry 331)

Chemistry 433

Inorganic Chemistry: Transition Metals

Lectures: Bonding models for metals and for transition metal compounds. Interpretation of redox and thermodynamic properties based on ligand field theory. Coordination and organometallic compounds of the transition metals. Metal complexes as catalysts in industry and biology. Laboratory: Synthesis, analysis, and physical investigations of transition metal compounds which illustrate their important properties.
Course Hours: 3 units; (3-3)
Prerequisite(s): Chemistry 201 or 211, and 203 or 213, and 331 or 431.
Also known as: (formerly Chemistry 333)

Chemistry 453

Advanced Organic Chemistry

Introduction to molecular orbital (MO) theory. Pericyclic reactions, the Woodward-Hoffmann rules. Photochemistry. Elucidation of reaction mechanism, and reactive intermediates. Laboratory: Multi-step synthesis and computer modelling of organic reactions.
Course Hours: 3 units; (3-4)
Prerequisite(s): Chemistry 351 and one of Chemistry 353 or 355.

Chemistry 471

Physical Chemistry: Kinetics and Spectroscopy

Vibrational, electronic and magnetic resonance spectra. Reaction kinetics and transport properties in the gas phase and in solution. Catalysis. Laboratory: Experimental measurements, interpretations, and calculations relating to the topics discussed in lectures.
Course Hours: 3 units; (3-1T-3)
Prerequisite(s): Chemistry 371 and 373.

Chemistry 502

Research in Chemistry

Comprehensive research project under the direction of a staff member. A research report must be presented on completion of the course, and attendance at a weekly research seminar is expected.
Course Hours: 6 units; (0-9)
Prerequisite(s): Consent of the Department.
Notes: It is recommended that students have completed the third year of their program in Chemistry, Applied Chemistry or Chemical Physics.
MAY BE REPEATED FOR CREDIT

Chemistry 515

Advanced Instrumental Analysis

Lectures: Fundamental aspects of modern instrumental methods. Spectroscopic methods: UV-visible and atomic absorption spectroscopy, flame and plasma emission methods. Chromatographic methods; liquid and gas chromatography. Mass spectrometry. Laboratory: Analysis of inorganic and organic samples using spectroscopic, electrochemical, and chromatographic instrumental methods.
Course Hours: 3 units; (3-4)
Prerequisite(s): Chemistry 311 and 315.

Chemistry 521

Introduction to Atmospheric Chemistry

An introduction to Tropospheric and Stratospheric Chemistry. The detailed chemistry of the stratosphere and troposphere. Gas-phase chemical kinetics. Photochemistry and atmospheric radiation. Aerosols. Anthropogenic pollution and air quality. Climate forcing. Introduction to modelling and atmospheric transport.
Course Hours: 3 units; (3-0)
Prerequisite(s): Chemistry 315 and 373.

Chemistry 531

Advanced Inorganic Chemistry: Transition Metals

Co-ordination and organometallic chemistry of the transition elements, incorporating the lanthanoids and actinoids. Fundamental and applied aspects, including characterization techniques, reaction mechanisms, catalysis and bioinorganic chemistry.
Course Hours: 3 units; (3-1T)
Prerequisite(s): Chemistry 331 or 431; and 333 or 433; and one of 353 or 355.

Chemistry 533

Advanced Inorganic Chemistry: Main Group Elements

Chemistry of the s- and p-block elements. Interpretation of nuclear magnetic resonance, electron paramagnetic resonance, vibrational and mass spectra. Fundamental concepts and industrial uses of inorganic heterocycles and polymers, electron-deficient and organometallic compounds. Solid-state chemistry.
Course Hours: 3 units; (3-1T)
Prerequisite(s): Chemistry 331 or 431; and 333 or 433; and one of 353 or 355.

Chemistry 535

Advanced Inorganic Laboratory

Advanced laboratory techniques for the synthesis and characterization of main group compounds, organometallics and solid-state materials using modern spectroscopic and structural methods. Includes a short project.
Course Hours: 3 units; (1-8)
Prerequisite(s): Chemistry 331, 333 and 453 and admission to the Chemistry major, Applied Chemistry major or Chemical Physics major.

Chemistry 541

Concepts in Biochemical Toxicology

An interdisciplinary course focused on the diverse biomolecular mechanisms by which organic (e.g. PCB’s) and inorganic pollutants (e.g. Cd, Hg, As) adversely affect cell function examined at multiple levels of organization, from molecules to whole organisms. Topics include how natural toxins exert toxicity, how toxins/light generate free radicals within cells, how the speciation of metals in the environment affects their bioavailability/toxicity, and the toxicity mechanisms that lead to homeostatic dysfunction.
Course Hours: 3 units; (3-0)
Prerequisite(s): Chemistry 311, 321, 351; and one of Biochemistry 341 or 393.
Antirequisite(s): Credit for Chemistry 541 and either Chemistry 641 or Biochemistry 541 will not be allowed.
Also known as: (Biochemistry 541)

Chemistry 551

Organic Synthesis

Concepts and strategies of synthesizing molecules with emphasis on carbon-carbon bond-forming reactions, protecting groups, chemo-, regio- and stereoselectivity.
Course Hours: 3 units; (3-1T)
Prerequisite(s): Chemistry 453.

Chemistry 553

Bio-organic Chemistry

Organic chemistry applied to the understanding of biomolecules: Selected topics from carbohydrate, peptide/protein, lipid and nucleoside chemistry, enzyme inhibition and drug design.
Course Hours: 3 units; (3-1T)
Prerequisite(s): Chemistry 453.

Chemistry 555

Advanced Organic Laboratory

Advanced laboratory techniques: Methods of purification and identification of products, purification of reagents, experimental design, working with air/moisture sensitive reagents. Includes a short research project.
Course Hours: 3 units; (1-8)
Prerequisite(s): Chemistry 453 and admission to the Chemistry major, Applied Chemistry major or Chemical Physics major.

Chemistry 559

Organic Spectroscopy

The instrumentation, theory and practical aspects of spectroscopy (e.g. UV/vis, MS, IR, 1H and 13C NMR including 2D-techniques). The emphasis will be on the application for structural elucidation through a problem solving approach.
Course Hours: 3 units; (3-1T)
Prerequisite(s): Chemistry 351 and one of 353 or 355.

Chemistry 571

Physical Chemistry of Interfaces

The chemical and electrical nature, as well as basic thermodynamics, of interfaces. Surface films and aqueous interfaces, including micelles and bilayers. Interfaces involving solids such as metals and semiconductors. Absorption phenomena and surface catalysis. Survey of experimental approaches for interfacial studies.
Course Hours: 3 units; (3-0)
Prerequisite(s): Chemistry 371 and 373.

Chemistry 573

Nature of the Condensed Phase in Chemistry

Theoretical models of liquids and solids. Dielectric continuum, polarizabilities and magnetism. Ionic crystal, insulators, conductors, semiconductors and super conductors. Some aspects of scattering techniques for structure determination.
Course Hours: 3 units; (3-0)
Prerequisite(s): Chemistry 371 and 373.

Chemistry 575

Advanced Electronic Structure Theory

A discussion of the theories of modern electronic structure illustrated by applications to molecular structure and bonding, electronic spectroscopy, as well as chemical reactivity and dynamics.
Course Hours: 3 units; (3-1T-3)
Prerequisite(s): Chemistry 371 and 373.

Chemistry 579

Surface and Colloid Chemistry for Engineers

Introduces the fundamental and applied aspects of interfacial phenomena including capillarity, surface and interfacial tension, films, wetting and contact angles, adsorption, micellization, solubilization and emulsification. Examples drawn from colloids, foams, aerosols and macromolecules.
Course Hours: 3 units; (3-0)
Prerequisite(s): Chemistry 209; and 357 or 379; and Chemical Engineering 427.

Chemistry 599

Selected Topics in Chemistry

Selected topics are offered based on the interests of Chemistry faculty and students.
Course Hours: 3 units; (3-0) or (3-3)
Prerequisite(s): Consent of the Department.
MAY BE REPEATED FOR CREDIT

Graduate Courses

Chemistry 601

Research Seminar

Reports on studies of the literature or of current research. Required of all graduate students in Chemistry.
Course Hours: 3 units; (2S-0)
NOT INCLUDED IN GPA

Chemistry 603

Research Seminar

Continuation of Chemistry 601.
Course Hours: 3 units; (2S-0)
NOT INCLUDED IN GPA

Chemistry 613

Electrochemical Fundamentals and Methodologies

Origin, significance, and thermodynamics of interfacial potential differences; structure of the double layer; basic principles of electron transfer at interfaces, Butler-Volmer equation; mass transport control of electro-chemical reactions; controlled potential methods as applied to electrode surface reactions and homogeneous reactions coupled to electron-transfer processes.
Course Hours: 3 units; (3-0)

Chemistry 615

Analytical Separations

Theory and practice of resolving mixtures into separate components for analysis. Basic theory; liquid-liquid extraction; high performance liquid chromatography; gas-liquid, open bed, ion exchange and exclusion chromatography; electrophoresis.
Course Hours: 3 units; (3-0)

Chemistry 617

Advanced Analytical Chemistry

Consideration of principles and equilibria pertaining to aqueous and nonaqueous neutralization, redox, complexation, precipitation and potentiometric methods employed in analyses. Statistical considerations of analytical data and analysis.
Course Hours: 3 units; (3-0)

Chemistry 619

Selected Topics in Analytical Chemistry

Topics of current interest such as: properties of synthetic polymer membranes, advanced instrumental methods, developments in chemical sensors, speciation studies, environmental analytical chemistry.
Course Hours: 3 units; (3-0)
MAY BE REPEATED FOR CREDIT

Chemistry 621

Organometallic Chemistry

A detailed discussion of structure, bonding and preparative methods in organometallic chemistry including the industrial and synthetic applications of organometallic compounds.
Course Hours: 3 units; (3-0)

Chemistry 623

Chemistry of the Main Group Elements

The chemistry of electron-deficient, electron-precise, and electron-rich rings, inorganic polymers, and organometallic compounds of the main group elements; applications of spectroscopic techniques; industrial uses. Seminars on recent research developments.
Course Hours: 3 units; (3-0)

Chemistry 627

Theoretical Inorganic Chemistry

Aspects of theoretical inorganic and organometallic chemistry including: quantitative and qualitative molecular orbital theory; the bonding and structure of molecules, clusters, and extended arrays; the fragments of organometallic species; orbital correlation diagrams in inorganic reactions; spectroscopic methods and their interpretation.
Course Hours: 3 units; (3-0)

Chemistry 629

Selected Topics in Inorganic Chemistry

Courses are offered to cover topics of current interest, such as bioinorganic chemistry, inorganic solution phenomena, and the inorganic chemistry of the solid state.
Course Hours: 3 units; (3-0)
MAY BE REPEATED FOR CREDIT

Chemistry 641

Concepts in Biochemical Toxicology

An interdisciplinary course focused on the diverse biomolecular mechanisms by which organic (e.g. PCB’s) and inorganic pollutants (e.g. Cd, Hg, As) adversely affect cell function examined at multiple levels of organization, from molecules to whole organisms. Topics include how natural toxins exert toxicity, how toxins/light generate free radicals within cells, how the speciation of metals in the environment affects their bioavailability/toxicity, and the toxicity mechanisms that lead to homeostatic dysfunction.
Course Hours: 3 units; (3-0)
Antirequisite(s): Credit for Chemistry 641 and either Chemistry 541 or Biochemistry 541 will not be allowed.

Chemistry 651

Advanced Organic Stereochemistry

Stereochemical principles in organic chemistry, including: geometry, bonding, symmetry, molecular isomerism, conformational analysis, asymmetric and stereocontrolled reactions.
Course Hours: 3 units; (3-0)

Chemistry 653

Advanced Organic Spectroscopy

Advanced spectroscopic techniques for the determination of complex organic structures. Emphasis will be on NMR methods, practical aspects of acquiring spectra, advanced interpretation and reporting spectral data.

Course Hours: 3 units; (3-0)

Chemistry 655

Advanced Organic Synthesis

A review of modern synthetic reactions and methods in the field of organic chemistry with emphasis on the recent literature.
Course Hours: 3 units; (3-0)

Chemistry 657

Theoretical Organic Chemistry

Theoretical principles of organic chemistry including stereochemistry, molecular orbital calculations, pericyclic processes (Woodward-Hoffmann rules), and PMO theory.
Course Hours: 3 units; (3-0)

Chemistry 659

Selected Topics in Organic Chemistry

Courses are offered in major branches of organic chemistry, including: carbohydrate chemistry, steroids and terpenoids, semiochemistry, heterocyclic chemistry, biosynthesis of secondary metabolites, as well as other topics of current interest.
Course Hours: 3 units; (3-0)
MAY BE REPEATED FOR CREDIT

Chemistry 669

Selected Topics in Applied Chemistry

Courses are offered in such topics as electrochemistry, industrial catalysis, chemistry of energy sources, colloid and surface chemistry and polymer chemistry.
Course Hours: 3 units; (3-0)
MAY BE REPEATED FOR CREDIT

Chemistry 681

Crystallography

A general introduction to X-ray analysis of single crystals. Topics include: Geometry of the crystalline state; diffraction of X-rays; Fourier synthesis; methods of structure solution; accuracy and precision of derived parameters.
Course Hours: 3 units; (3-0)

Chemistry 689

Selected Topics in Physical Chemistry

Courses are offered in such topics as dielectric properties, kinetics, molecular vibrations, fluorescence spectroscopy, X-ray diffraction.
Course Hours: 3 units; (3-0)
MAY BE REPEATED FOR CREDIT

Chemistry 701

Independent Study

Independent study not directly related to the student's thesis project normally under the direction of any chemistry faculty member. A course information sheet must be provided and a student report must be submitted on completion of the course.
Course Hours: 3 units
Notes: Multiple 701 courses can be offered in any one term. However, students may take this course for credit not more than twice.
MAY BE REPEATED FOR CREDIT

UofC